Differences

This shows you the differences between two versions of the page.

--- output_menu [2011/07/12 10:08] – created Jan_K
+++ output_menu [2013/10/15 05:50] (current) – Jan_K
@@ Line 4: / Line 4: @@
 In this menu Lock Output and Show Output are available.\\
 \\
+{{:images:output_menu:output_menu.gif|}}\\
+\\
+\\
+==== Lock Output ====
+This function freeze the output from FreeStyler.\\
+All fixtures will get a red box and in the menu bar a padlock is shown (Right side).\\
+To unlock click “Lock Output” again.\\
+\\
+{{:images:output_menu:lock_output.gif|}}\\
+\\
+\\
+==== Show Output ====
+This window monitor the actual output value on the channels.\\
+\\
+{{:images:output_menu:show_output.gif|}}\\
+\\
+**If a channel has been manipulated then the text will be shown as white on a red background.**\\
+{{:images:setup_menu:setup_preferences_correction_output.gif|}}\\
+The manipulation can be patching to an other channel or a correction offset.\\
+See: [[setup:setup_preferences#Patch|]] and [[setup:setup_preferences#Correction|]]\\
+NOTE: this windows show the actual DMX value's (3d view can act differnt then this window.)\\
+\\
+\\
+\\
+By right clicking on a channel the popup menu bellow appears.\\
+\\
+{{:images:output_menu:show_output_popup_menu.gif|}}
+\\
+\\
+=== Invert Channel ===
+This function inverts the output.\\
+Normal the fader from 0 to 100 % gives the DMX value 0 to 255. Inverted the fader 0 to 100 % giver the DMX values 255 to 0.\\
+\\
+\\
+=== Disable Channel ===
+Disable the single channel so the value for this channel will not change but continue having the value from the time where it was disabled.\\
+\\
+\\
+=== Remove Channel from playback ===
+\\
+Remove channel from playback, stopts the channels that are active in the Submaster, Cue window, Cuelistbuttons.\\
+also look at: [[playback:overridebuttons:override_blue_triangle|Override / Blue triangle]]\\
+\\
+\\
+=== Reset channel settings ===
+Remove lowest, highest limit, invert, disable, patching and correction for the single channel.\\
+\\
+\\
+=== Reset all channel settings ===
+Same as above but for all channel.\\
+\\
+\\
+=== Set as lowest limit ===
+Is set by moving the control for this channel to a given value and then “Set as lowest limit”\\
+The value from the control can not go lower than this value.\\
+It is reset by Reset channel settings.\\
+\\
+\\
+=== Set as highest limit ===
+Same as above but just for highest limit.\\
+\\
+\\
+=== Remove limits ===
+This simply removes the limits that are set with "Set as lowest limit" and/or "Set as highest limit".\\
+\\
+\\
+----
+\\