Guys,
Im Using Freestyler 2.96 and a JMS USB2DMX Interface,
but I cant for the life of me get my Soundlab Colourscans to react to DMX!
Initially i thought it was a problem with the fixture as all my other fixtures work fine, so i got a new 1 and it wont react either!
The fixtures react to a DMX signal from another colourscan, but not from the interface. The addressing is good, I've checked it over and over!
Any suggestions??
Thanx in advance.
Soundlab Colourscan not reacting to DMX
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
humek
- Knows how to turn Lights ON
- Posts: 5
- Joined: 10 Nov 2009, 18:45
- FreeStyler Version: 2.96j
- I Use FreeStyler for: Church
- Twitter: twitter.com/
-
remco_k
- Moderator
- Posts: 1233
- Joined: 12 Oct 2008, 23:27
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Soundlab Colourscan not reacting to DMX
Maybe (if above is the solution) its better to open the colourscans and make the wires of pins 2 & 3 cross internally.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
humek
- Knows how to turn Lights ON
- Posts: 5
- Joined: 10 Nov 2009, 18:45
- FreeStyler Version: 2.96j
- I Use FreeStyler for: Church
- Twitter: twitter.com/
Re: Soundlab Colourscan not reacting to DMX
Heading up to the DJ shop shortly for some new DIP switches (as I thought this could also be a cause), so I'll pick up a couple of XLR patch leads to modify while im there!
This is the only thing iv not tried!
Standby for the results.............................
This is the only thing iv not tried!
Standby for the results.............................
-
humek
- Knows how to turn Lights ON
- Posts: 5
- Joined: 10 Nov 2009, 18:45
- FreeStyler Version: 2.96j
- I Use FreeStyler for: Church
- Twitter: twitter.com/
Re: Soundlab Colourscan not reacting to DMX
GREAT SUCCESS!!
Made a patch lead this afternoon from a cheap XLR lead and all works fine!
The warrantys up on the lights anyway so ill open them up an get the wires on the DMX connections swapped round.
Many thanx for the help folks!
P.S Bought myself a new laser this afternoon aswell
Made a patch lead this afternoon from a cheap XLR lead and all works fine!
The warrantys up on the lights anyway so ill open them up an get the wires on the DMX connections swapped round.
Many thanx for the help folks!
P.S Bought myself a new laser this afternoon aswell