First have you tried? Log in to Search the Forum for help! Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE
if all else fails and you need a fixture consider the fixture building service HERE
Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Although most fixtures people make will be posted on the forum, i bet their is a fair few that are not.
We need to stop discouraging people asking if members already have files.
The users are not asking if we can create a file for them, there asking if there is one readily available, There's no point reinventing the wheel.
Now however if a user is asking for a member to create one for them, is a different matter.
Fixture files are very easy to create, the images can be a little time consuming thou.
As long as you remember that not all attributes of a fixture may be catered for.
I.E LASERS, theirs a lot of functions that lasers carry which freestyer does not have a place holder for, and sometimes a little ingenuity is required E.G A channel to make the image larger or smaller,
IF you have your patterns assigned to the GOBO Channel, you can use the gobo rotation channel to adjust the size of the patterns.
Multi ringed led par cans also seem to be a problem for most users as freestyler only supports 3 channel rgb, fixtures that require 6 or 9 will either have to use faders for the rest of the channels or pach the other channels together in Freestylers fixture setup.
