Hello all,
I have a problem i cannot figure out. I have a double moving head with 15 channels. The heads can be controlled seperately because both heads have a different dmx channel for pan and tilt in 15 channel mode.
I need to be able to use the pan of the heads in mirror. As fixture creator doesn't allow multiple channels for pan and tilt i cannot figure out how to do this in one file. I have added the channel list below.
Hope someone can help me
Regards
Andre.
Double moving head 6 LED
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
DreNL
- Has mastered Fixture Creator
- Posts: 35
- Joined: 25 Sep 2014, 22:25
- FreeStyler Version: 4.1.7
- I Use FreeStyler for: DJ
Double moving head 6 LED
You do not have the required permissions to view the files attached to this post.
-
Rod_Horning
- Moderator
- Posts: 903
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.7
- I Use FreeStyler for: Stage Show
Re: Double moving head 6 LED
The channel layout is most unfortunate. With other fixtures such as this the solution is to define multiple fixtures. In this case it would be 3 fixtures. 1 fixture for pan/tilt of one head. Another fixture for pan/tilt of the other head and a 3rd fixture for the rest of the functions. This will not work with this fixture due to the pan/tilt channel layout. I think the best you can do is define a 15 channel fixture with one head as pan and tilt, say channels 1 and 2, and just label channels 3 and 4 and use the sliders in the upper right hand corner to position the 2nd head. The other functions can be defined as usual.
Good luck.
Good luck.