no luck on my first post, so maybe this one is possible.
i'm setting up scenes, and can get the fade in control working, but i want no fade out and that is not an option on the sequence creator (it goes down to half a second but i'm looking for it to snap off)
is this possible?
fade in/out
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
gvrnmtwrng
- Knows how to turn Lights ON
- Posts: 2
- Joined: 26 Feb 2025, 01:00
- FreeStyler Version: 4.1.7
- I Use FreeStyler for: Stage Show
-
Rod_Horning
- Moderator
- Posts: 836
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: fade in/out
Yes.
While the Sequence Editor is open and you have the sequence step being edited, select the instrument and set the desired channel to SNAP. This is accomplished by clicking on the right side of the faders in the upper right corner or on the left side of the bar in the LAMP window until a yellow lightening bolt is displayed).
This causes Freestyler, when the sequence is run, to send the target DMX value immediately instead of gradually changing the value across a time interval.
While the Sequence Editor is open and you have the sequence step being edited, select the instrument and set the desired channel to SNAP. This is accomplished by clicking on the right side of the faders in the upper right corner or on the left side of the bar in the LAMP window until a yellow lightening bolt is displayed).
This causes Freestyler, when the sequence is run, to send the target DMX value immediately instead of gradually changing the value across a time interval.