Hi all,
Would it be possible for one of you talented people to create me a profile for this fixture please, much appreciated
I have linked the manual:
https://www.manua.ls/beamz/intibar-300- ... manual?p=9
Kind regards
Daniel
BeamZ IntiBar 300
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
storer77101
- Just started using FS
- Posts: 10
- Joined: 12 Jun 2018, 19:49
- I Use FreeStyler for: Where do I start?
-
Rod_Horning
- Moderator
- Posts: 837
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: BeamZ IntiBar 300
Hello
Can you supply the shape of GOBO 1,2 ...8 and the color of Color 1,2 ... 8
This will make the fixture definition more helpful when you program a sequece.
Can you supply the shape of GOBO 1,2 ...8 and the color of Color 1,2 ... 8
This will make the fixture definition more helpful when you program a sequece.
-
storer77101
- Just started using FS
- Posts: 10
- Joined: 12 Jun 2018, 19:49
- I Use FreeStyler for: Where do I start?
Re: BeamZ IntiBar 300
Hey unfortunately I don't have that information.
-
Rod_Horning
- Moderator
- Posts: 837
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: BeamZ IntiBar 300
OK.
Do you still need the fixture created?
If so, what version of Freestyler are you using?
The GOBO shapes and Color 1, 2 ... can be added to the fixture later.
Do you still need the fixture created?
If so, what version of Freestyler are you using?
The GOBO shapes and Color 1, 2 ... can be added to the fixture later.
-
storer77101
- Just started using FS
- Posts: 10
- Joined: 12 Jun 2018, 19:49
- I Use FreeStyler for: Where do I start?
Re: BeamZ IntiBar 300
Hi Rod,
I do if possible, I am using version 4.1.5. Much appreciated
Kind Regards
Daniel
I do if possible, I am using version 4.1.5. Much appreciated
Kind Regards
Daniel
-
Rod_Horning
- Moderator
- Posts: 837
- Joined: 16 Nov 2016, 14:24
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: Stage Show
Re: BeamZ IntiBar 300
Attached is a fixture definition that I think will work with your instrument.
The GOBO wheel only has numbers as I did not see any graphics.
I did not see documentation on what color was color 1, color 2, etc. I set up macros to select the color instead of the color wheel since I could get number graphics for the macro picture.
Also, being time constrained at the moment, I did not define macros for the functions on channel 7 (I would have to create meaningful graphics and that will take some time).
Give it a try and let me know how it works. It can always be updated if you obtain additional information (such as what color matches the numbers in the macros).
I suggest you read the forum about the 4.1.5 issues. You may want to install 4.1.6
The GOBO wheel only has numbers as I did not see any graphics.
I did not see documentation on what color was color 1, color 2, etc. I set up macros to select the color instead of the color wheel since I could get number graphics for the macro picture.
Also, being time constrained at the moment, I did not define macros for the functions on channel 7 (I would have to create meaningful graphics and that will take some time).
Give it a try and let me know how it works. It can always be updated if you obtain additional information (such as what color matches the numbers in the macros).
I suggest you read the forum about the 4.1.5 issues. You may want to install 4.1.6
You do not have the required permissions to view the files attached to this post.
-
storer77101
- Just started using FS
- Posts: 10
- Joined: 12 Jun 2018, 19:49
- I Use FreeStyler for: Where do I start?
Re: BeamZ IntiBar 300
Hi Rod,
Thank you very much, will try this out tonight. Your time is much appreciated.
Cheers
Thank you very much, will try this out tonight. Your time is much appreciated.
Cheers