I just created 3 fixtures. When I add each, everything works fine. I shut down the program, re-open, and now the intensity does not send DMX output (visible from output window). Running v 4.1.0.
What am I missing? Or is this a bug? I tried searching but there's a bunch of ads to weed through.
Intensity not sending to output
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Just started using FS
- Posts: 12
- Joined: September 28th, 2013, 10:08 pm
- FreeStyler Version: 3.5.4
- I Use FreeStyler for: DJ
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: July 10th, 2021, 8:30 pm
Re: Intensity not sending to output
Same here,
I have another pc running with 3.6.50 and there it seems like it is running fine, so I moved back to version 3.6.50 (copy the version from the other pc) and now there is also this bug.
Removing the fixture and re-adding it fixes the issue, but only to a certain point.
I will try to reproduce the error and write back.
I use Art-net btw.
I have another pc running with 3.6.50 and there it seems like it is running fine, so I moved back to version 3.6.50 (copy the version from the other pc) and now there is also this bug.
Removing the fixture and re-adding it fixes the issue, but only to a certain point.
I will try to reproduce the error and write back.
I use Art-net btw.
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: July 10th, 2021, 8:30 pm
Re: Intensity not sending to output
Found the problem.... you have to crank up the Master intensity Next to the "GO" button.