There is a strobe.
When connected to a remote control (a normal 192-channel remote control), the maximum flashing speed is faster than if the speed fader is turned off to 255 in the Freestyler.
The speed channel settings are specified min = 0, max 255.
What can this be related to?
Different max strobe speed in freestyler and 192-channel remote control
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Just started using FS
- Posts: 11
- Joined: July 25th, 2020, 10:43 am
- FreeStyler Version: 3.6.51
- I Use FreeStyler for: Home Lighting Control
-
- FS is my life
- Posts: 781
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Different max strobe speed in freestyler and 192-channel remote control
most likely one is using dmx control and the other is accessing built in macros
-
- Just started using FS
- Posts: 11
- Joined: July 25th, 2020, 10:43 am
- FreeStyler Version: 3.6.51
- I Use FreeStyler for: Home Lighting Control
-
- FS is my life
- Posts: 781
- Joined: July 11th, 2007, 8:39 pm
- FreeStyler Version: 4.01
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
- Contact:
Re: Different max strobe speed in freestyler and 192-channel remote control
If you have a really cheap USB to DMX the refresh rate can be slower and cannot be adjusted. I use the Enttec Pro micro and in the Freestyler setup you can adjust the refresh rate (I use the lowest setting it will allow).
Maybe that is reason?
Maybe that is reason?
-
- Can now teach FS to others (Hopefully!)
- Posts: 76
- Joined: October 14th, 2012, 7:30 pm
- FreeStyler Version: 4.14
- I Use FreeStyler for: Home Lighting Control
Re: Different max strobe speed in freestyler and 192-channel remote control
Or you have "Link sliders with channel functions" on (under the setup tab)
Ik i have that on the strobe settings on my Mega hex Pars doesn't work corectly either.
The random strobe on the pars go to 223, anything above that turns the strobe off and the lights on, 0 is strobe off + lights off
With Link Sliders on those settings go up to 255 and 255 is random strobe while 0 is the normal fast strobe.
Ik i have that on the strobe settings on my Mega hex Pars doesn't work corectly either.
The random strobe on the pars go to 223, anything above that turns the strobe off and the lights on, 0 is strobe off + lights off
With Link Sliders on those settings go up to 255 and 255 is random strobe while 0 is the normal fast strobe.