I have a sequence with 2 scanners (jb systems winner).
And i have a sequence with 8 pars (ADJ megapar profiles)
When i play the par-sequence in a cue, the scanners are off, like it should be.
When i start the scanner-sequence in the cue, the scanners switch on, but the pars keep on shining, they do not switch off.
(Multicue is off)
What are possible the causes?
How can i solve this?
Thank you
How can i solve this?
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
stompinne
- Starting to get to grips with FreeStyler
- Posts: 22
- Joined: 28 Sep 2007, 16:33
-
buttza
- FS is my life
- Posts: 351
- Joined: 07 Jan 2010, 14:14
- FreeStyler Version: 3.6.4
- I Use FreeStyler for: Stage Show
- Twitter: twitter.com/@buttza
Re: How can i solve this?
Are your Pars running in 3 Channel RGB Mode?
If so you will need to add an RGB off step in your Scanner Sequence. Scanner On / RGB 0% = Red 0%, Green 0%, Blue 0%.
If so you will need to add an RGB off step in your Scanner Sequence. Scanner On / RGB 0% = Red 0%, Green 0%, Blue 0%.