I'm awaiting the delivery of a few Chauvet Intimidator Beam LED 350 fixtures. I built my own profile, but since there isn't a fixture in Easy View, I decided to play around with a Intimidator Spot 350 instead. I notice 2 things right away:
1) It only Tilts 90-degrees (+/- 45-degrees of center) and Pans 180-degrees. I know the fixture can pan 540-degrees and tilt 270-degrees. Is that possibly related to my second issue, which is:
2) I had mentioned this in another thread, but when I select anything other than a figure 8 (ie: circle, rectangle), the patten seems to follow the pattern twice, similar to the figure 8. I sort of understand the explanation of rescaling, etc (viewtopic.php?f=6&t=1594#p22700), however I'd like to see a screen shot of someone's bezier or pan/tilt grid that is moving an Intimidator MH to help me better understand.
Thanks for the assistance.
Help with Chauvet Intimidator profile
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
djmt99
- Just started using FS
- Posts: 12
- Joined: 28 Sep 2013, 22:08
- FreeStyler Version: 3.5.4
- I Use FreeStyler for: DJ
-
djmt99
- Just started using FS
- Posts: 12
- Joined: 28 Sep 2013, 22:08
- FreeStyler Version: 3.5.4
- I Use FreeStyler for: DJ
Re: Help with Chauvet Intimidator profile
This is the file I've been playing with. I've left the Pan/Tilt Range field empty, at 255, and at 540/270, all yielding the same behavior as mentioned above.
You do not have the required permissions to view the files attached to this post.