Chauvet Intimdator SCAN LED 200
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
thelodgemd
- Knows how to turn Lights ON
- Posts: 9
- Joined: 06 Mar 2012, 04:08
- FreeStyler Version: 3.5.2
- I Use FreeStyler for: Nightclub Lighting
- Contact:
Chauvet Intimdator SCAN LED 200
I used a fixture for the Chauvet Intimidator SCAN LED 300 (from this Forum) to try and create a fixture for the 200. I have gotten pretty far, but some things are not quite right - can someone give what I have done a look and give me any thoughts/changes. The fixture (in progress) and DMX codes 9as a two page PDF) are attached and the manual specs are below. Many thanks for your help! Ryan - The Lodge Nightclub
You do not have the required permissions to view the files attached to this post.
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Chauvet Intimdator SCAN LED 200
Hej.
You have strobe low = 130, high = 214.
The data sheet says 8 to 215.
Additional you have on "Gobo rot. 1" placed channel 7 Function.
It is some reset and control functions.
Think it is better to place them on macros.
The macros are better for fixed values
Also it is better to have function the sets modes and reset fixture, separated from the gobo control panel.
Please pin point if there are anything that don't work as expected then we can take it from there.
/Jan
You have strobe low = 130, high = 214.
The data sheet says 8 to 215.
Additional you have on "Gobo rot. 1" placed channel 7 Function.
It is some reset and control functions.
Think it is better to place them on macros.
The macros are better for fixed values
Also it is better to have function the sets modes and reset fixture, separated from the gobo control panel.
Please pin point if there are anything that don't work as expected then we can take it from there.
/Jan
-
thelodgemd
- Knows how to turn Lights ON
- Posts: 9
- Joined: 06 Mar 2012, 04:08
- FreeStyler Version: 3.5.2
- I Use FreeStyler for: Nightclub Lighting
- Contact:
Re: Chauvet Intimdator SCAN LED 200
Thanks, Jan, for the help - I will continue on and post a new file with some specific questions. Again many thanks for your help and support as I learn. Ryan
-
thelodgemd
- Knows how to turn Lights ON
- Posts: 9
- Joined: 06 Mar 2012, 04:08
- FreeStyler Version: 3.5.2
- I Use FreeStyler for: Nightclub Lighting
- Contact:
Re: Chauvet Intimdator SCAN LED 200
Jan,
It seems I'm not getting it. When I open the color bar...there is a slider to run through the color changes. Also there are color pictures/blocks so you can pick a color quickly. I updated channel 3 to match the DMX codes in the manual - and updated the color pictures. According to the manual, channel 3 has 20 colors - so I set the color channel to 3 and set the number of colors to 20.
When I am in freestyler, the color squares do not match what I programmed....and clicking the color squares produce different colors on the light (clicking blue makes the light pink)
Can you please look at my channel 3 programming and the chart that I completed - and hopefully you can tell me where I went very wrong.
Many thanks - Ryan
It seems I'm not getting it. When I open the color bar...there is a slider to run through the color changes. Also there are color pictures/blocks so you can pick a color quickly. I updated channel 3 to match the DMX codes in the manual - and updated the color pictures. According to the manual, channel 3 has 20 colors - so I set the color channel to 3 and set the number of colors to 20.
When I am in freestyler, the color squares do not match what I programmed....and clicking the color squares produce different colors on the light (clicking blue makes the light pink)
Can you please look at my channel 3 programming and the chart that I completed - and hopefully you can tell me where I went very wrong.
Many thanks - Ryan
You do not have the required permissions to view the files attached to this post.
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Chauvet Intimdator SCAN LED 200
I have been counting colors on channel 3 there are only 18 or am I using a wrong manual.
I have changed the color wheel so it follows the table above.
I uses mid values so the color wheel alvays will be placed in the middle of a range.
http://www.freestylersupport.com/wiki/f ... &s[]=value
/Jan
I have changed the color wheel so it follows the table above.
I uses mid values so the color wheel alvays will be placed in the middle of a range.
http://www.freestylersupport.com/wiki/f ... &s[]=value
/Jan
You do not have the required permissions to view the files attached to this post.