how to load the freestyler SYX file

[fred]

good night at all,

sorry I'm certainly the first one to ask you this. I just received my BCF 2000. before I was using freestyler with an external keyboard.

but how or where is the explanation about how to upload the syx file to the BCF 2000.

and later on how to fix each value "pan, tilt, ficture button etc...." to faders or butons on the BCF 2000.

sorry once again for boring you for the 20th times

fred

[Spirit]

you can find everything on the Freestyler wiki
http://www.freestylersupport.com/wiki/external_control here you can find how the midi controll works.
With a Example for the BCF2000.

[fred]

thx a lot !

[fred]

Good evening,

I tried to upload the syx file with the Behringer software but I have the following error message " run time error"

Does anybody has an idea please ?

Best regards,

[Spirit]

if you used BC_edit to upload your .SYX
then you right because BC_edit cant do this you need BC manager to do this.
http://home.kpn.nl/f2hmjvandenberg281/bcman.html

/spirit

[fred]

I will try it tonight

Thx Spirit

[Spirit]

also beaware you Upload the Syx file on Preset 1-32

NOT preset "0" because it a temporarily preset

/spirit

[fred]

hi Spirit,

my bcf 2000 is conected to my computer with USB cable, and then the BCF 2000 staus is shown as OFFLINE

do you have any solution please ?

fred

[Spirit]

oke yes.

you have 2 screens on calls BC manager an the other B-Controls

Now Go to the BC manager window en press Options -> Midi devices.
Now Enable the BCF2000 on the input and output.
Now on the same window again go to Options -> B-controls Detect .
now its going to search for all the b-controls and if thats finished, Offline will change to Online.

/spirit

[fred]

Great great !

I will let you know !

[fred]

it works

but how I can tell to the software to dowload the date from the row 1 and not 0

unfortunately it begins from the 0 which is not good

[Spirit]

there's a Copy and paste button on the software.

so Copy Preset 0 to Preset 1 and then Send the midi data.

/spirit

[fred]

super, now I have Freestyler V1 on the row 1 and all others rows are empty, is it right ?

but now freestyler do not take in count any movment of faers etc,,,, excepted if I choose P-1 on the BCF 2000, is it right ?

that means from now I can start to configure my BCF2000 as I want ?

thx again Spirit

[Spirit]

Yes this is right because the BCF2000 can Store 32+0 Fader/Button layouts ( PRESET )
only 0 is a temporarily preset if you restart the Bcf he will forget Preset 0

Yes you can do what you like, only your able to use one Midichannel of 127+0 Note's

and on the "B-Control 3 (BCF2000): preset" window you see the Rows from 0 TO 32
these are Preset 0 to 32

/spirit

[fred]

I tried to assigned some functions, for example 1 fader for master intensity and when I move the fader nothing is moving. the same if I assigned a button to blackout function

nnrrddhh, sorry but I'm not a lightman I'm pretty sure that this tool is fantastic but this perparation work is out of my knowledge

thx again

[Spirit]

oke but the BCF2000 have nothing to do with lighting

Its a midi controler and it works on the MIDI portocol.
and on the wiki you can see how to config a Fader to a FS function.

/spirit