I am VERY new to all this and I am looking for a profile for a NW FX Lighting / Passport Par 64 Led 6 channel fixture.
Or help creating a fixture profile where
Channel 1 = Dimmer
Channel 2 = Red
Channel 3 = Green
Channel 4 = Blue
Channel 5 = Strobe
Channel 6 = Shade RGB (?)
Not sure what Shade RGB means. The manual suggests that it is a simple color mixing fader. For the "Shade RGB" channel the manual says dmx address 0-127, 128-191, 192-255. I am guessing that 0-127 is red and so on. Thanks
NW FX Lighting/Passport LED Par 64
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
dwebb1911
- Starting to get to grips with FreeStyler
- Posts: 18
- Joined: 01 May 2012, 13:48
- FreeStyler Version: 3.5.2
- I Use FreeStyler for: Stage Show
- Contact:
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: NW FX Lighting/Passport LED Par 64
Hej dwebb1911
Here is a good place to start. http://www.freestylersupport.com/wiki/f ... led_parcan.
/Jan
Here is a good place to start. http://www.freestylersupport.com/wiki/f ... led_parcan.
/Jan
-
dwebb1911
- Starting to get to grips with FreeStyler
- Posts: 18
- Joined: 01 May 2012, 13:48
- FreeStyler Version: 3.5.2
- I Use FreeStyler for: Stage Show
- Contact:
Re: NW FX Lighting/Passport LED Par 64
Thanks !! Good help there. I have been able to create the profile. But I cannot figure out channel 6.
Channel 6 = Shade RGB. Not sure what Shade RGB means. The manual suggests that it is a simple color mixing fader. For the "Shade RGB" channel the manual says dmx address 0-127, 128-191, 192-255. I am guessing that 0-127 is red and so on. Any thoughts on this. I could leave it out. Not sure it's very useful.
Channel 6 = Shade RGB. Not sure what Shade RGB means. The manual suggests that it is a simple color mixing fader. For the "Shade RGB" channel the manual says dmx address 0-127, 128-191, 192-255. I am guessing that 0-127 is red and so on. Any thoughts on this. I could leave it out. Not sure it's very useful.
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: NW FX Lighting/Passport LED Par 64
You have to make it as a 6 channel fixture but you don't have to place any control on channel 6.
When you test the fixture then there will be a panel in the right side of FreeStyler with 6 sliders.
Try to play with slider 6 and see what it does. You can the decide what you will do with it.
Note that it may change function depending on the other channels setting.
/Jan
When you test the fixture then there will be a panel in the right side of FreeStyler with 6 sliders.
Try to play with slider 6 and see what it does. You can the decide what you will do with it.
Note that it may change function depending on the other channels setting.
/Jan