Differences

This shows you the differences between two versions of the page.

--- playback:overridebuttons:override_buttons [2012/01/13 06:20] – Jan_K
+++ playback:overridebuttons:override_buttons [2016/06/18 00:59] (current) – maros336
@@ Line 1: / Line 1: @@
 ====== Override buttons ======
 \\
-The override buttons are used to play the first scene/Step of a sequence with highest priority. The values of the scene are transmitted as override values so they have the highest priority in Freestyler. The buttons can be configured as latch (on/off) or flash. These buttons can be used to control strobes, dmx powerpacks, Movement from the pan/tilt window and other types of special scenes.\\
+The override buttons are used to set one scene. It is in basic an extended manual fixture control and are not to be mistaken for a sequence play back though it uses a sequence to record the fixture control settings.\\
+**If the sequence that are attached to the override button contain more steps then only the first step / scene is used.**\\
+A simple example could be color control where some fixture are to red and some other are to be blue.\\
+With manual override there will be a lot of selecting fixtures and colors. The alternative is to record this as a scene and attach it to an override button.\\
+It is now a only one button to press and the scene is set.\\
+This can of course also be done by adding the sequence to a cue and then use one of the playback possibilities.\\
+Using the override buttons or sub masters or fast cue load buttons to make these scene settings is up to the user, to determine what works best.\\
+\\
+The values of the scene are transmitted as override values so they have the highest priority in Freestyler.\\
+The buttons can be configured as latch (on/off) or flash. These buttons can be used to control strobes, dmx powerpacks, Movement from the pan/tilt window and other types of special scenes.\\
+\\
+On the figure bellow override functions like "ALLbluegreen", "Allmulticolor", "allred" are used.\\
+But allmost all the Sequences with ONLY one step (Except channels that uses HTP) can with benefit be placed on the Override buttons.\\
+Try it with functions like this to get a feeling.\\
+  * Unordered List Item-Gobo (Gobo selection)
+  * GoboRot. (Slow/med/fast)
+  * Color ( Color selection)
+  * Strobo (Slow/med/fast) ALL and for strobe FixtureType separate like Ledpar/Strobo/MH-Scan)
+  * Iris (On /Off)
+  * IrisRot. (Slow/med/fast)
+  * Frost (Low/med/high)
+\\
 \\
 {{:override_buttons.png}}\\