Differences

This shows you the differences between two versions of the page.

--- playback:dmx400 [2011/10/25 10:26] – Jan_K
+++ playback:dmx400 [2013/03/11 03:46] (current) – external edit 127.0.0.1
@@ Line 81: / Line 81: @@
 **Disable color changing.**\\
 This stops the color in the setting that are present when it is stopped.\\
-Can the color be changed /set manually.\\
 \\
 **All Same color**\\
 A program will run all the steps in the same color and then shift the color and run all the steps again\\
 Example. All steps will be preformed in red, then shift to blue and the steps repeated and so on for all colors.\\
-How many different colors. Is it only basic colors?\\
 \\
 **10 vivid colors**\\
@@ Line 102: / Line 100: @@
 \\
 **Note:** When running sequences at the same time: the chaser only works when in a sequence the corresponding channels are set to” off”. If in a sequence the same channels are marked as “Fade” or “Snap” then the sequence has priority and the DMX400 channels are ignored.\\
+\\
+\\
+\\
 ----
-**Old Text.**\\
 \\
-Many people have an external dimmerpack with PARs connected to; most of these people need a separate chaser to control these. That's why there is a built in chaser in Freestyler called DMX400.
-You can even use it with RGB LED fixtures !!!
-Specifications:
-- 4-6-8-12 channel
-- Dimmer / channel
-- Flash / channel
-- Master dimmer
-- Master flash
-- Background
-- Static or chaser modus
-- 9 different chases
-- Can be controlled by sound
-- Fade time
-- RGB support
-Configuration of DMX 400:
-First step is to make sure that you've configured some Pars or RGB fixtures. See add / remove fixtures
-Now right click on the fixture you want to control with the DMX400 on channel 1 and select "Use in DMX400", Freestyler will ask you the DMX400 channel (1-12). Repeat these step for each fixture you want to control with DMX400, but always make sure it has an intensity channel or RGB channels !
-{{:dmx400.jpg?nolink|}}
-The three buttons on the right are only for RGB functionality (Disable color changing, all same color and vivid colors)
-You can use DMX 400 in two modes: Static (no animation) or chaser (animation).
-Each channel has its own intensity, there is a master intensity and a background intensity (always visible).
-To change chaser pattern press the "Program" button, if you want to change pattern after a certain time then press the button under the interval slider and set the desired interval.
-Note: When running sequences at the same time: the chaser only works when in a sequence the corresponding channels are set to" off". If in a sequence the same channels are marked as "Fade" or "Snap" then the sequence has priority and the DMX400 channels are ignored.
 [[welcome|{{:fshome.jpg|}}]]