Hello everyone,
To begin with, sorry for my english, I'm french
I bought several sets of light
I want to use Freestyler, but I have trouble using fixture Creator
Can you help me create the fixture for the Chauvet Hive
as an attachment you will find photos of the manual for the DMX configuration
Thank you to you for your valuable help
Kericoul
Fixture for Chauvet Hive - Help [SOLVED]
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
- Just started using FS
- Posts: 12
- Joined: 03 Sep 2014, 09:21
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
Fixture for Chauvet Hive - Help [SOLVED]
You do not have the required permissions to view the files attached to this post.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Fixture for Chauvet Hive - Help
The 3 channel version could look like this.
/Jan
/Jan
You do not have the required permissions to view the files attached to this post.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Fixture for Chauvet Hive - Help
And the 20 ch version may look like this.
You do not have the required permissions to view the files attached to this post.
-
- Just started using FS
- Posts: 12
- Joined: 03 Sep 2014, 09:21
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
Re: Fixture for Chauvet Hive - Help
thank you very much for your answer.
I tested your configuration when I come back tomorrow night.
I'll post two more questions for my other 2 sets of lights on other new posts
thank you very much to you for your help
I tested your configuration when I come back tomorrow night.
I'll post two more questions for my other 2 sets of lights on other new posts
thank you very much to you for your help
-
- Just started using FS
- Posts: 12
- Joined: 03 Sep 2014, 09:21
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
Re: Fixture for Chauvet Hive - Help
Hello there,
I tested your fixture, it does not work.
I test in 3 channels configuration:
- There are only the pod 6 that glows
- On / Off lamp is not working
- The strobe is not working
- Same thing for automatics program
Any idea? thank you
I tested your fixture, it does not work.
I test in 3 channels configuration:
- There are only the pod 6 that glows
- On / Off lamp is not working
- The strobe is not working
- Same thing for automatics program
Any idea? thank you
You do not have the required permissions to view the files attached to this post.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Fixture for Chauvet Hive - Help
If only one of the pod is glowing then I sounds like your light is running in 20 channel mode and not 3 channel mode.
You are to set that in your fixture. There is a menu point where it can be set to 3 or 20 channel mode.
The "Open / Closed" button are not suppose to be shown in the panel as no values are on these.
It is an error or the way FreeStyler lamp panel is created so it don't work.
You could place channel 1 on the shutter channel and then give closed the value "0" and open the value "12". Then at least something happens when you press the buttons.
You are to set that in your fixture. There is a menu point where it can be set to 3 or 20 channel mode.
The "Open / Closed" button are not suppose to be shown in the panel as no values are on these.
It is an error or the way FreeStyler lamp panel is created so it don't work.
You could place channel 1 on the shutter channel and then give closed the value "0" and open the value "12". Then at least something happens when you press the buttons.
-
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Fixture for Chauvet Hive - Help
You do not have the required permissions to view the files attached to this post.
-
- Just started using FS
- Posts: 12
- Joined: 03 Sep 2014, 09:21
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
Re: Fixture for Chauvet Hive - Help
thank you for your reply.
I'll test your fixture tonight or tomorrow.
this is very nice
I'll test your fixture tonight or tomorrow.
this is very nice
-
- Just started using FS
- Posts: 12
- Joined: 03 Sep 2014, 09:21
- FreeStyler Version: 3.5.5
- I Use FreeStyler for: DJ
Re: Fixture for Chauvet Hive - Help
Hello there,
I just tested your fixture Hive 20 channels.
It works very very well
All functions are working properly
Now I have to settle for integrated programs
Thank you very much for your contribution
I just tested your fixture Hive 20 channels.
It works very very well
All functions are working properly
Now I have to settle for integrated programs
Thank you very much for your contribution