hello all who read. i am currently new to the programme and the whole dmx process. i am currently trying to hook up my casa - ctl-dcm laser to the programme with very little luck. i have found a .ssl file that someone has made already to use with other programmes but am unsure of how to get it working with freestyler and have also tried creating a custom fixture programme but this has gone with no success.
any help or advice would be hugely appreciated!
regards
retroloving!
fixture file for my laser. help would be awesome!
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
retroloving
- Knows how to turn Lights ON
- Posts: 4
- Joined: 04 Oct 2012, 18:41
- I Use FreeStyler for: Nightclub Lighting
-
matt
- Admin
- Posts: 468
- Joined: 09 Jul 2007, 19:00
- FreeStyler Version: NULL
- I Use FreeStyler for: DJ
- Twitter: twitter.com/hankosky
Re: fixture file for my laser. help would be awesome!
Do you have the dmx values for each channel?
Matt Hankosky
twitter.com/hankosky
flickr.com/photos/mattxhank
twitter.com/hankosky
flickr.com/photos/mattxhank
-
retroloving
- Knows how to turn Lights ON
- Posts: 4
- Joined: 04 Oct 2012, 18:41
- I Use FreeStyler for: Nightclub Lighting
Re: fixture file for my laser. help would be awesome!
(this is what i found before)
Here with the Control Parameter Chart Please:
Channel - function - Value = Description
Ch1 -Mode Value 0~49 = Close, Laser OFF
50~99 = Sound active mode
100~149 = Auto mode
150~199 = static patterns of DMX mode
200~255 = Dynamic patterns of DMX mode
CH2 - Pattern Selection 0-255 = 52static/dynamic pattern
CH3 - Position-X - 0~255 = Adjust position X
CH4 - Position Y - 0~255 = Adjust position Y
CH5 - Scanning Speed - 0~255 = 0 is speedy, 255 is slow
CH6 - Dynamic Patterns play speed - 0~255 = 0 is speedy, 255 is slow, has ten grade speed
CH7 - Static Pattern size - 0~255 = 0 is small, 255 is big
I hope this helps.
the link below will take you to the table on ebay
http://www.ebay.com/itm/RGPY-4...&hash=item43a816243e
Here with the Control Parameter Chart Please:
Channel - function - Value = Description
Ch1 -Mode Value 0~49 = Close, Laser OFF
50~99 = Sound active mode
100~149 = Auto mode
150~199 = static patterns of DMX mode
200~255 = Dynamic patterns of DMX mode
CH2 - Pattern Selection 0-255 = 52static/dynamic pattern
CH3 - Position-X - 0~255 = Adjust position X
CH4 - Position Y - 0~255 = Adjust position Y
CH5 - Scanning Speed - 0~255 = 0 is speedy, 255 is slow
CH6 - Dynamic Patterns play speed - 0~255 = 0 is speedy, 255 is slow, has ten grade speed
CH7 - Static Pattern size - 0~255 = 0 is small, 255 is big
I hope this helps.
the link below will take you to the table on ebay
http://www.ebay.com/itm/RGPY-4...&hash=item43a816243e
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: fixture file for my laser. help would be awesome!
I just had a fast look on the dmx table.
It is not that complex.
Export the fixture you have tried to create and upload it here.
Then I will guide you.
/Jan
It is not that complex.
Export the fixture you have tried to create and upload it here.
Then I will guide you.
/Jan