Hi! I created a custom fixture for the Proel PLML575EPS moving head.
Everything is working fine, apart from pan and tilt.
When I use FreeStyler with the Magic 3D visualizer each movement I make in the pan/tilt panel (arrows or grid) correspond to the correct movement in the visualizer.
But when I connect my real moving heads to the Enttec DMX USB Pro the movements are not the same as FS and M 3D.
Note that the real moving heads are placed upside down attached to a truss, with me facing at the display and the connections on the rear.
How can I fix this problem?
Thank you for your help in advantage!
Pan/tilt problem
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
madhatter
- Knows how to turn Lights ON
- Posts: 1
- Joined: 20 Jul 2012, 10:40
- FreeStyler Version: 3.4.8
- I Use FreeStyler for: Stage Show