Hi
I have a regular 500 W High power can light. I currently have an on/off switch. I will be moving that to a DMX controller so that I could control via laptop of blackout to 100% brightness. I am not sure which fixture to select in the software. I bought this light at a regular electrical store couple of years ago. I am using velleman 116 USB device that will connect to a DMX on Channel 1.
Any idea on how to achieve the above would be a greatly appreciated. I am novice in this DMX world.
http://www.stagelights.com/par_fixtures ... _UL_Listed
My light can looks like this, UL Par-64 Light Fixture. It has wide angle 500 W bulbs.
Regards,
Raj
How to Add normal Can light
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
raj
- Knows how to turn Lights ON
- Posts: 1
- Joined: 01 Mar 2012, 20:16
- FreeStyler Version: 3.4.6
- I Use FreeStyler for: Choir
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: How to Add normal Can light
Hej Raj.
You need something to control you "can" with because it don't have a DMX interface.
It can be a dimmer pack like this http://www.americandj.com/ProductDetail ... mer%20pack.
And for these devices there are many fixtures available.
Have evt. a look here http://www.freestylersupport.com/wiki/f ... ial:dimmer
/Jan
You need something to control you "can" with because it don't have a DMX interface.
It can be a dimmer pack like this http://www.americandj.com/ProductDetail ... mer%20pack.
And for these devices there are many fixtures available.
Have evt. a look here http://www.freestylersupport.com/wiki/f ... ial:dimmer
/Jan