First have you tried?
Log in to Search the Forum for help!
Learn more about using FreeStyler at the FreeStyler WIKI HERE
Learn more about DMX in General at The DMX Wiki HERE
if all else fails and you need a fixture consider the fixture building service HERE

Pan 2 problem...

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service

You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
dorrimoldi
Knows how to turn Lights ON
Posts: 6
Joined: 12 Dec 2010, 14:03
FreeStyler Version: 3.3.2
I Use FreeStyler for: Film

Pan 2 problem...

Post by dorrimoldi »

Hi everyone.
Is there a way to create a fixture and have a second pan?

I have a RoboHead X-3 LED by Stairville, which has 3 axis, therefore it has Pan 1 AND also Pan2, along with Pan1/Pan2/Tilt speed.

Please have a look here: http://images.thomann.de/pics/prod/253248_manual.pdf

I do not know where I can set the Pan1/2/Tilt speed channel and above all how to assign the Pan2 using the FreeStyler FixtureCreator in order to properly create/control this fixture in FreeStyler.

HELP! :)
You do not have the required permissions to view the files attached to this post.


Top
Post Reply

Return to “FreeStyler Fixture Files - Help & Support”