American DJ Revo Sweep and Stairville MATRIXX FL 100

[Alec25283]

HI guys and gals,

Hoping someone can help me out. Trying to create the fixtures for these two lights but just don't seem to be able to get it right.

DOes anyone have these files for freestyler or could someone create them for me.

I would be so appreciative if you could, I hve tried myself for the last two weeks but just cannot get it right. maybe it's me in fact more than likely


many many many thanks


Alec

[LJ_krede.dk]

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you...

Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....

You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.

[dmxlighting]

Regarding the Revo Sweeps - are trying to create it in 3 channel or 28 channel mode?

You will have better success if you make macros for this effect. Control of effects like this is never straight forward especially when there are so many channels.
One way to do it would be to make a profile to control the first 4 channels (in 28 chan mode) via some macros then make a separate profile to control RGBW (red green blue white). Then in FS select the control profile and 6 RGBW profiles per unit. Sounds complicatedbut this is how I would do it on my Zero88 Leap Frog and it would work for you in FS.

If your going down the easier 3 channel route the just make some macros and away you go...

I will at some point need to make a profile for these myself as I have just started fitting them in clubs and I use FS to test.

[remco_k]

HI guys and gals,
DOes anyone have these files for freestyler or could someone create them for me.

I would be so appreciative if you could, I hve tried myself for the last two weeks but just cannot get it right. maybe it's me in fact more than likely

If someone ever did make this fixture, it would probably be found on this forum. So if its not, you need to create it yourselves.
Corresponding to the forum rules, we are not going to create the fixture file for you.
You _have_ to learn doing this yourself, as otherwise there comes one day you really need the knowledge and have just minutes to create something...
Its easy to make the fixture file for any fixture, you just need to understand the basics. And you learn those basics by making the fixture file.

You're telling you have been busy for the last two weeks, then please post the fixture file (.pff) here and the manual of the fixture (containing the DMX channel description) itself and tell us what fails or don't work for you. Also note (if applicable) in what mode you want to use the fixture.
Then you'll get more likely proper help, and better: you'll understand.