Hello all
I Have bought a JMS USB2DMX device from eBay to use with freestyler, works great, a part from that it 'locks up' every hour or so. The red LED is on the device, but no DMX signal is being received to the fixtures. So I have to unplug it, close down freestyler then plug the USB2DMX device back in and restart freestyler.
It’s starting to get to me now!!
The fixtures I’m using are a set of 4 Martin Mx-4s which go into a sound to light mode once no DMX signal is being received.
Please help me sort this problem out!!!
Cheers dave
My YouTube channel http://www.youtube.com/user/DMXMANIAC N-joy
Problem with JMS USB2DMX device
-
- Just started using FS
- Posts: 11
- Joined: February 22nd, 2009, 1:09 am
- I Use FreeStyler for: TV Broadcast
-
- Just started using FS
- Posts: 11
- Joined: February 22nd, 2009, 1:09 am
- I Use FreeStyler for: TV Broadcast
Re: Problem with JMS USB2DMX device
I have sent an e-mail to the ebay seller explaining the problem.
I'm guessing the problem is because it's cheap to buy.
I'm guessing the problem is because it's cheap to buy.
- Shannon D
- FS is my life
- Posts: 324
- Joined: April 10th, 2008, 10:26 pm
- FreeStyler Version: 3.3.2
- I Use FreeStyler for: Band
Re: Problem with JMS USB2DMX device
For just a lil bit more money, you could of got the Enttec Pro for $136. It's what most of us here use. I have not any troubles with mine or heard of anyone else saying their's failed. It's worth every penny. Freestyler is free , so it makes for a perfect match.
I suggest upgrading to the Enttec Pro.
http://cgi.ebay.com/ENTTEC-DMX-USB-Pro- ... 5884fc8d62
Good Luck
I suggest upgrading to the Enttec Pro.
http://cgi.ebay.com/ENTTEC-DMX-USB-Pro- ... 5884fc8d62
Good Luck
-
- Just started using FS
- Posts: 11
- Joined: February 22nd, 2009, 1:09 am
- I Use FreeStyler for: TV Broadcast
Re: Problem with JMS USB2DMX device
I'm from the uk so need to buy the DMX interface here from the uk which works will freestyler.
I would of bought Martin's lightjockey DMX interface just that its a little too much money.
I would of bought Martin's lightjockey DMX interface just that its a little too much money.
- dmxlighting
- FS is my life
- Posts: 1025
- Joined: August 11th, 2008, 11:46 pm
- FreeStyler Version: beta
- I Use FreeStyler for: Where do I start?
Re: Problem with JMS USB2DMX device
Enttec Pro all the way. Hands down the best usb-dmx interface to use and very well supported on this forum and others too.
Aside from Onges suggestion of where to buy one, you can get it direct from Enttec via their website and you can use paypal to purchase - 125 EUR.
http://www.enttec.com/index.php?main_me ... escription
I got mine direct from them (im also in the UK) with no problems
Aside from Onges suggestion of where to buy one, you can get it direct from Enttec via their website and you can use paypal to purchase - 125 EUR.
http://www.enttec.com/index.php?main_me ... escription
I got mine direct from them (im also in the UK) with no problems
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
-
- Just started using FS
- Posts: 12
- Joined: April 9th, 2009, 7:18 pm
- FreeStyler Version: 3.3.1
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
Re: Problem with JMS USB2DMX device
did you use a cheap fogging machine?
the jms usb2dmx interface seems to be really sensative for distubence on the net...
(bad cabeling, bad fixture or netstability)
every time i used my cheap fogging machine dmx got thrown out...
{do NOT buy this fogger machine xD! http://plsshop.nl/detail.asp?pid=5170195A }
the jms usb2dmx interface seems to be really sensative for distubence on the net...
(bad cabeling, bad fixture or netstability)
every time i used my cheap fogging machine dmx got thrown out...
{do NOT buy this fogger machine xD! http://plsshop.nl/detail.asp?pid=5170195A }
- remco_k
- Moderator
- Posts: 1233
- Joined: October 12th, 2008, 11:27 pm
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Problem with JMS USB2DMX device
And use an DMX terminator.Onge wrote:That is one of the reasons to use an interface that has a good opto-isolator.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
- Just started using FS
- Posts: 12
- Joined: April 9th, 2009, 7:18 pm
- FreeStyler Version: 3.3.1
- I Use FreeStyler for: Nightclub Lighting
- Twitter: twitter.com/
Re: Problem with JMS USB2DMX device
that did not make a difference with that interface... its just a startup model for people who only want to control their stroboscope or something like that...
not for proffessional purposes
not for proffessional purposes
remco_k wrote:And use an DMX terminator.Onge wrote:That is one of the reasons to use an interface that has a good opto-isolator.
-
- Just started using FS
- Posts: 13
- Joined: January 30th, 2012, 4:47 am
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Problem with JMS USB2DMX device
So reviving an old post. I'm using an ADJ MYDMX dongle and I have the same problem. Whenever the USB cable gets bumped or something 'locks up' I lose all connection and have to unplug the USB cable, plug it back in, then restart Freestyler to get a signal again. Did Enttec Pro fix the problem?