Hello. I'm a new user of FS.
My interface DMX is Velleman K8062. I'm use FS 2.96G.
I am not getting to use Fogger Window. How to configure FS so that gets to recognize my smoke machine in the channel DMX 117? I didn't find any option to make this configuration. Manually I manage to do the machine to loosen smoke but in the automatic way no.
Thanks.
Silva. Carlos A. L.
Brazil.
Fog Machine
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
- Knows how to turn Lights ON
- Posts: 7
- Joined: 03 Sep 2007, 02:42
- FreeStyler Version: 2.96g
- Contact:
- djSupport
- Hosts the Freestyler Forum and is an Admin!
- Posts: 1914
- Joined: 09 Jul 2007, 18:57
- FreeStyler Version: Forum la
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: Fog Machine
you need to make a fixture file using fixture creator then clicking the box that says fogger or something familiar if you used one already with FS it may have been an old one before the feature was implemented! open it up in fixture creator and select that option and save it! 

Heather Trott, You Babe! I Drive a Dacia Duster and Explore! Check it out
-
- Knows how to turn Lights ON
- Posts: 7
- Joined: 03 Sep 2007, 02:42
- FreeStyler Version: 2.96g
- Contact:
Re: Fog Machine
I didn't find none of these options in Fixture Creator version 3.92.
-
- Knows how to turn Lights ON
- Posts: 3
- Joined: 30 Nov 2008, 12:28
Re: Fog Machine
I fear being shouted down for reviving this thread, but at least it shows that I have tried to find the answer to my problem before asking for help!
I am creating a fogger fixture using creator 3.98. I start by saying that I am creating a 'fogger-hazer' on the first screen of creator. When I import the fixture in to FreeStyler 512, it does not recognise the allocated chanel when I use the fogger control button. My fogger is listed on the 'show output' screen, but does not have output when I use the button.
What am I doing wrong.
Thank you
Sparko, the barefoot lighting guy
I am creating a fogger fixture using creator 3.98. I start by saying that I am creating a 'fogger-hazer' on the first screen of creator. When I import the fixture in to FreeStyler 512, it does not recognise the allocated chanel when I use the fogger control button. My fogger is listed on the 'show output' screen, but does not have output when I use the button.
What am I doing wrong.
Thank you
Sparko, the barefoot lighting guy
-
- Knows how to turn Lights ON
- Posts: 2
- Joined: 27 Mar 2009, 18:07
- FreeStyler Version: 3.0.1
- I Use FreeStyler for: DJ
Re: Fog Machine
Hello,
I do have the same problem. I am using fixture creator 4.1 and FS 3.0.12(Beta Version). I got no problem creating the fixture and importing it in FS. Now, if I select the Fogger in FS, I can manually send 0-255 values and it works. I am using an Antari Z-1000II which is kind of on-off mode. Values below something like 100 = off and values over something like 100 = 100%. Now, the problem is that I am unable to use the specific fog window with the timer and everything... I am managing this problem creating sequences but I would really appreciate to find a work to make it work.
Thanks!
I do have the same problem. I am using fixture creator 4.1 and FS 3.0.12(Beta Version). I got no problem creating the fixture and importing it in FS. Now, if I select the Fogger in FS, I can manually send 0-255 values and it works. I am using an Antari Z-1000II which is kind of on-off mode. Values below something like 100 = off and values over something like 100 = 100%. Now, the problem is that I am unable to use the specific fog window with the timer and everything... I am managing this problem creating sequences but I would really appreciate to find a work to make it work.
Thanks!
- dmxlighting
- FS is my life
- Posts: 1025
- Joined: 11 Aug 2008, 23:46
- FreeStyler Version: beta
- I Use FreeStyler for: Where do I start?
Re: Fog Machine
Eagle wrote:Hello,
I do have the same problem. I am using fixture creator 4.1 and FS 3.0.12(Beta Version). I got no problem creating the fixture and importing it in FS. Now, if I select the Fogger in FS, I can manually send 0-255 values and it works. I am using an Antari Z-1000II which is kind of on-off mode. Values below something like 100 = off and values over something like 100 = 100%. Now, the problem is that I am unable to use the specific fog window with the timer and everything... I am managing this problem creating sequences but I would really appreciate to find a work to make it work.
Thanks!
It might be that your foggers personality does not support the info being sent?
Freestyler DMX - Pissing over the competition since 199x
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
What do you want for free ?
Freelance Lighting Programmer / Sound Engineer / Designer / Installer and General All Round AV Expert
- Mattotone
- Android Dev (Moderator)
- Posts: 1238
- Joined: 10 Jul 2007, 17:30
- FreeStyler Version: BETA
- I Use FreeStyler for: Just for the Fun of it.
Re: Fog Machine
Sparko wrote:I fear being shouted down for reviving this thread, but at least it shows that I have tried to find the answer to my problem before asking for help!
I am creating a fogger fixture using creator 3.98. I start by saying that I am creating a 'fogger-hazer' on the first screen of creator. When I import the fixture in to FreeStyler 512, it does not recognise the allocated chanel when I use the fogger control button. My fogger is listed on the 'show output' screen, but does not have output when I use the button.
What am I doing wrong.
Thank you
Sparko, the barefoot lighting guy
Does the show output windows show the correct values when using the fog windows or do they not react at all?
Freestyler Addons www.120db.uk
Free Dropbox. 2GB account http://db.tt/J4c5G8C
$100 free credit @DigitalOcean Private Server: https://m.do.co/c/5c4a7c7d6693
Freestyler Android App: https://play.google.com/store/apps/deta ... rts.fs1024
Free Dropbox. 2GB account http://db.tt/J4c5G8C
$100 free credit @DigitalOcean Private Server: https://m.do.co/c/5c4a7c7d6693
Freestyler Android App: https://play.google.com/store/apps/deta ... rts.fs1024
- Mattotone
- Android Dev (Moderator)
- Posts: 1238
- Joined: 10 Jul 2007, 17:30
- FreeStyler Version: BETA
- I Use FreeStyler for: Just for the Fun of it.
Re: Fog Machine
Just followed your steps to create a Fogger and all seems fine.
shows in the dmx output.
shows in the dmx output.
Freestyler Addons www.120db.uk
Free Dropbox. 2GB account http://db.tt/J4c5G8C
$100 free credit @DigitalOcean Private Server: https://m.do.co/c/5c4a7c7d6693
Freestyler Android App: https://play.google.com/store/apps/deta ... rts.fs1024
Free Dropbox. 2GB account http://db.tt/J4c5G8C
$100 free credit @DigitalOcean Private Server: https://m.do.co/c/5c4a7c7d6693
Freestyler Android App: https://play.google.com/store/apps/deta ... rts.fs1024
- LJ_krede.dk
- Moderator
- Posts: 1028
- Joined: 29 Oct 2007, 20:01
- FreeStyler Version: 3.3.7
- I Use FreeStyler for: Where do I start?
Re: Fog Machine
I have also tried it without any problemsMattotone wrote:Just followed your steps to create a Fogger and all seems fine.
shows in the dmx output.
/LJ_krede.dk
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report
Aalborg, Denmark
Moderator, Supporter and Bug report manager for the FreeStyler community
Found a bug? Submit a Bug Report