I've just bought a QTXlight LS-X PRO Laser,
The problem creating a profile for this is,
It is a 10 channel laser, however, what channels 2 thru 10 do, depends on the output from channel 1.
Example-
When channel 1 output is 175-199, channel 3 controls X-Axis movement.
BUT,
When channel 1 output is 200-224, channel 3 controls zoom, and X-Axis movement moves to channel 7!
How could i reflect this when building the fixture profile?
Thanx in advance.
QTXlight LS-X PRO Laser
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
humek
- Knows how to turn Lights ON
- Posts: 5
- Joined: 10 Nov 2009, 18:45
- FreeStyler Version: 2.96j
- I Use FreeStyler for: Church
- Twitter: twitter.com/
-
humek
- Knows how to turn Lights ON
- Posts: 5
- Joined: 10 Nov 2009, 18:45
- FreeStyler Version: 2.96j
- I Use FreeStyler for: Church
- Twitter: twitter.com/
Re: QTXlight LS-X PRO Laser
Macros all sorted for the laser now 
Took me some time!! haha
Gettin there now, thanks to you guys
Getting to grips with Cues next...............
Thanx again!
Took me some time!! haha
Gettin there now, thanks to you guys
Getting to grips with Cues next...............
Thanx again!
-
PWES
- Has mastered Fixture Creator
- Posts: 30
- Joined: 05 Aug 2007, 10:50
Re: QTXlight LS-X PRO Laser
Hey Humek, any chance you could email me the fixture file please ? to pete@pwes.co.uk
Would save me a few hours !!
Thanks !
Pete
Would save me a few hours !!
Thanks !
Pete
Affordable Public Liability Insurance for UK DJs at just £29.99 !! http://www.mobiledjnetwork.co.uk