Hey everyone,
I'm looking to build a fixture file for this light but I can seem to figure it out. The manual is only 1 page and all it mentions is that it is a 7 channel unit, each channel controls a ring of lights.
Any thoughts?
Irradiant / Neo Neon IRL-6005 / 6006
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
premiumdj
- Knows how to turn Lights ON
- Posts: 4
- Joined: 19 Oct 2008, 06:07
-
remco_k
- Moderator
- Posts: 1233
- Joined: 12 Oct 2008, 23:27
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Irradiant / Neo Neon IRL-6005 / 6006
Yep, try to create it yourself in fixture creator and if you ask here, at least post the DMX definitions here'.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
premiumdj
- Knows how to turn Lights ON
- Posts: 4
- Joined: 19 Oct 2008, 06:07
Re: Irradiant / Neo Neon IRL-6005 / 6006
Thanks a lot for your help guys. I'm starting to get the hang of it and will post the fixture file once I'm done. Any idea on how I can get these things to strobe? The lamp settings seem "grayed" out. I only have color mixing on the right and sequence creating.
-
remco_k
- Moderator
- Posts: 1233
- Joined: 12 Oct 2008, 23:27
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Irradiant / Neo Neon IRL-6005 / 6006
For that to know we'll still need the DMX definitions.
If that has no info about strobing, then the fixture can't strobe by itself. Then you'll need to do the strobing with a sequence.
If it can strobe by itself; its just a matter of putting the right values in the right places in the fixture creator. (Strobe ch. low, mid and high)
If that has no info about strobing, then the fixture can't strobe by itself. Then you'll need to do the strobing with a sequence.
If it can strobe by itself; its just a matter of putting the right values in the right places in the fixture creator. (Strobe ch. low, mid and high)
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
ko stradivarius
- Knows how to turn Lights ON
- Posts: 7
- Joined: 02 Feb 2009, 19:47
- FreeStyler Version: 3
- I Use FreeStyler for: Just for the Fun of it.
Re: Irradiant / Neo Neon IRL-6005 / 6006
Hi, I have a couple of these as well. I just got them and haven't built a Freestyler fixture file though as Im a newbie.
Here is the link to the manual.
http://www.chauvetlighting.com/products ... ug-126.pdf
yes, its the same thing as the Chauvet LED-PAR196.
These fixtures are very simple. The only DMX control is for the 7 circles of LEDs. No standalone features. You must use a controller to use these.
Here is the link to the manual.
http://www.chauvetlighting.com/products ... ug-126.pdf
yes, its the same thing as the Chauvet LED-PAR196.
These fixtures are very simple. The only DMX control is for the 7 circles of LEDs. No standalone features. You must use a controller to use these.
-
remco_k
- Moderator
- Posts: 1233
- Joined: 12 Oct 2008, 23:27
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Irradiant / Neo Neon IRL-6005 / 6006
From that manual:
CHANNEL - INTENSITY CONTROL OF
1-Red
2-Green
3-Blue
4-Red
5-Green
6-Blue
7-Red
So, it can't flash by itself. You need to make sequences that turns on and off all channels at the same time.
CHANNEL - INTENSITY CONTROL OF
1-Red
2-Green
3-Blue
4-Red
5-Green
6-Blue
7-Red
So, it can't flash by itself. You need to make sequences that turns on and off all channels at the same time.
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
ko stradivarius
- Knows how to turn Lights ON
- Posts: 7
- Joined: 02 Feb 2009, 19:47
- FreeStyler Version: 3
- I Use FreeStyler for: Just for the Fun of it.
Re: Irradiant / Neo Neon IRL-6005 / 6006
I built one this past weekend. I've included some macros for different colors as well(which may be wrong but you can tweak them to your liking).
As soon as I get a chance I'll post it.
As soon as I get a chance I'll post it.
-
remco_k
- Moderator
- Posts: 1233
- Joined: 12 Oct 2008, 23:27
- FreeStyler Version: N/A
- I Use FreeStyler for: To help others here on the Forum!
Re: Irradiant / Neo Neon IRL-6005 / 6006
You could have done that directly as posting a fixture file takes less than 1 minute longer than your previous post. 
But please do...
But please do...
Developer of the Sound 2 Light application (SL.exe) for FreeStyler: https://www.digiplay.nl/fs
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
Electronics runs on magic smoke. If it escapes, the electronics won't work anymore!
Need a SHOUTcast stream?: https://www.digiplay.nl
-
ko stradivarius
- Knows how to turn Lights ON
- Posts: 7
- Joined: 02 Feb 2009, 19:47
- FreeStyler Version: 3
- I Use FreeStyler for: Just for the Fun of it.
Re: Irradiant / Neo Neon IRL-6005 / 6006
OK. I uploaded my file in the other section. 