I just picked up some of these mini DMX spots.
https://www.ebay.com/itm/292242352439
I have been messing with the figure creator but can't figure out how to get the strobe dimmer and shutter to work right all on the same channel. Any help with creating a fixture file would be greatly appreciated.
LED Colorful Beam Pinspot
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
dbqtech
- Knows how to turn Lights ON
- Posts: 4
- Joined: 01 Jun 2018, 03:27
- FreeStyler Version: X2
- I Use FreeStyler for: Just for the Fun of it.
LED Colorful Beam Pinspot
You do not have the required permissions to view the files attached to this post.
-
Laudrin
- Can now teach FS to others (Hopefully!)
- Posts: 77
- Joined: 20 Dec 2017, 12:48
- FreeStyler Version: 3.6.49
- I Use FreeStyler for: Just for the Fun of it.
- Contact:
Re: LED Colorful Beam Pinspot
Hey dbqtech, you can configure your fixture file to have different functions on the same DMX channel. The range of course should not overlap (there are some functions where this is possible).
If you do not manage it by yourself with this information, just post the fixture file here (zip if necessary) so someone can take a look at it and possibly help.
Bye, Laudrin
If you do not manage it by yourself with this information, just post the fixture file here (zip if necessary) so someone can take a look at it and possibly help.
Bye, Laudrin
-
Dj3540
- Knows how to turn Lights ON
- Posts: 2
- Joined: 19 Jan 2019, 21:41
Re: LED Colorful Beam Pinspot
I too have a few of these. Not the brightest but fit my need for effect. I started within fixture creator by starting a 6ch blank custom fixture and saved it. Using the sliders in Freestyler was able to map each channel and functions inside the 0~255 range. The light does function at 95%. My only problem that I have tried and tried to configure is [ch1 dimmer 0~134 value]. When using the ch1 value range [0~134] the channels 2,3,4 and 5 all move from 0~255 simultaneously producing a white light. I would like to use ch1 slider [0~134] to dim current output color spectrum other than RGBW. Attached is the fixture profile and manual. Thank you.
You do not have the required permissions to view the files attached to this post.
-
carnevale
- Knows how to turn Lights ON
- Posts: 2
- Joined: 03 Jun 2018, 00:28
- FreeStyler Version: 3.6
- I Use FreeStyler for: DJ
Re: LED Colorful Beam Pinspot
Did you create the driver for this one ?
-
Dj3540
- Knows how to turn Lights ON
- Posts: 2
- Joined: 19 Jan 2019, 21:41
Re: LED Colorful Beam Pinspot
Yes I did in fixture creator. For some reason this pinspot is giving me issues now. Some how my current profile on computer is different than the included image above...going to jump in and change it to what the photo shows. Currently when the light turns on its stuck in strobe mode
-
Olivemx
- Knows how to turn Lights ON
- Posts: 3
- Joined: 25 Mar 2023, 17:53
- FreeStyler Version: 4.1.6
- I Use FreeStyler for: DJ
Re: LED Colorful Beam Pinspot
Bonjour, J'ai acheté ces mêmes lumières "RGBW Spot Light" sur AliExpress et je rame pour faire les macros... est-ce que quelqu'un aurait le fichier pilote ?
Merci, beaucoup !
Merci, beaucoup !