How can I connect another Art-net-node to my LAN. I'll have another IP-Adress (for the second one). As far a I know there are only one adress for Artnet to set for the interface.
I'm using wifi to get the DMX from my DJ-Console to the lights truss. Over there I'm heaving an Wifi-client and an Art-net-node which provides the DMX for the lights/effects. Now I would like to add some Floorspots to my freestyler on the other side of the room - so another wifi-client and a second Art-net-node.
Thanks so far!
more than one Art-net-node? [SOLVED] Topic is solved
Forum rules
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
Please do NOT post bugs here! If you spot a potential Bug please report it HERE first then you can chat about it with other users in the appropriate section.
-
surfvill
Re: more than one Art-net-node?
Because there are no responses to my post I've been crawling the internet for other solutions. At least I found a very simple one in the network basics. If I set the broadcast address to xxx.xxx.xxx.255 so in my case to 192.168.0.255, the DMX is sended to all devices in that adress range. I'm having two Art-net nodes - one with the IP 192.168.0.91 and one with 192.168.0.92 and now both are receiving the DMX from freestyler!