problem with overview button [SOLVED]

[FALCETTA]

Hello everyone,

I have a little problem, I created various effects for 2 moving heads led rgbw, and a button that when I press should put their heads in a certain position turned white.
If I have a cue and hit the start button, the heads must be in the position giusma, but the color instead of being white is just mixed with the other colors of the cue, I'll explain if I make a cue with red lights, I click on the button and the heads must be in the right position but instead of making white light mixed the red with white, in a nutshell the basic colors of the cue you see the same even if the button is bianko, why?

tanks

[spud1511]

When you created the scene for your set position with white, did you set the other colour values (rgb) to zero and choose snap or fade (not off).

[buttza]

I agree with Spud. You need to check in your added cues that the other colours to the colour mix have been removed.

[FALCETTA]

are the other colors in the scene I set the white off..me l.ho put on snap .. it seems that the button overlaps the cue that is going to enom that completely takes the command ..

[FALCETTA]

okkey, I did it, I put the rgb colors off for this was not working properly .. thank you very much!!!