Slimpar 56 Problem [SOLVED]
Forum rules
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
A place for you to request fixture files to be created by other users - PLEASE BE WARNED THIS MAY NEVER HAPPEN AS WE ENCOURAGE YOU TO TRY YOURSELF AND WILL GIVE PROMPTS as and when we can. at the END OF THE DAY Creating fixtures isn't easy if we don't have that particular light and an appropriate manual! BE WARNED!
IF YOU HAVE HAD A REQUEST FULFILLED PLEASE MARK THE TOPIC AS SOLVED!
You can now pay for fixtures if you don't want to wait or create your own by going to here http://www.freestylersupport.com/wiki/f ... on_service
-
lynzel
- Knows how to turn Lights ON
- Posts: 6
- Joined: 05 Feb 2014, 23:27
- I Use FreeStyler for: Nightclub Lighting
Slimpar 56 Problem [SOLVED]
I'm fairly new to freestyler and need help urgently. I have 10 slimpar led 56's hooked up to each other but have problems controlling them individually. When i choose one to go to a certain color it does that,as soon as i click on the other slimpar all the slimpars change color and i;m therefore not able to do individual sequences.help please
-
lynzel
- Knows how to turn Lights ON
- Posts: 6
- Joined: 05 Feb 2014, 23:27
- I Use FreeStyler for: Nightclub Lighting
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Slimpar 56 Problem
Hej lynzel
Under "Output" there is a monitor "Show Output".
If you open that one you can see what Freestyler sends out to the fixtures.
Deselect "all" fixtures and when you are sure that no fixtures are selected then select "one" at the time and check that only values for the one selected fixture is changed.
/Jan
Under "Output" there is a monitor "Show Output".
If you open that one you can see what Freestyler sends out to the fixtures.
Deselect "all" fixtures and when you are sure that no fixtures are selected then select "one" at the time and check that only values for the one selected fixture is changed.
/Jan
-
lynzel
- Knows how to turn Lights ON
- Posts: 6
- Joined: 05 Feb 2014, 23:27
- I Use FreeStyler for: Nightclub Lighting
Re: Slimpar 56 Problem
Thanks alot Jan-K