minspot

[matt5035]

has any one got a file for minspot as i made one in fixture creator but it not working that well in the 3d view or can some one help with that ?

[Spirit]

if you mean the Cauvet minspot there is already a fixture file for this light in Freestyler.
and i tried it with 3d easy view and it seems to work fine.

Only the fixture file is the 13channel mode version, and not the 5channel mode.

[matt5035]

ok got it but got a problem the light do not work in 3d mode am i ues the ones?

[Spirit]

1.did you have the good Interface selected: Virtual Interface?
2.Did you patch everything right?

3.or non of these things please be a little more specific

[matt5035]

well they don't move and where you go to move the lights pan and tilt it changes the colors in 3d mode????

[Spirit]

yes i did tried it with the 5channel mode and the pan and tilt changes the Color.

But you need to select the 13Channel mode fixture in 3dEasyview.
if you look in the fixture libary from 3d Easyview and go to Chauvet search for the minspot you will see this:
minspot 13ch <----------- this fixture file works great if i try it
minspot 13channel
minspot 5ch
minspot 5channel
minspot_13channel
and on.....

[matt5035]

ok done that now i put the usb dmx cable in but the light not doin any think what do i do?

[Mavi]

Again:
1.did you have the good Interface selected: NOT Virtual Interface this time but the interface you use
2.Did you patch everything right?

[rtecnico]

Friend, your lights are from Chauvet or from China??? Also if you are runing a 13ch fixture profile, you must set your real fixture to 13ch mode insted of 5ch mode. Also just to be sure, re check your dmx address.