Hej folks
Think my PC is f.....
When I uses the arrows the blue ball goes direct into the left side and I can't move it with the arrows.
If I press right arrow the Pan value increases from 0 to 1 and thats all.
I can only shift between 0 and 1 pressing the arrows.
If I use the mouse and the blue ball then it all works. Both the 8bit and 16 channel change nicely.
I have reinstalled FS but it is the same.
Any ideas.
/Jan
Help movement don't work
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service
You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Help movement don't work
You do not have the required permissions to view the files attached to this post.
-
Spirit
- Pro Supporter! (Moderator)
- Posts: 1421
- Joined: 10 Jul 2010, 20:55
- FreeStyler Version: 3.5.9
- I Use FreeStyler for: Nightclub Lighting
Re: Help movement don't work
you can also do it like this.
1) Delete Freestyler (first make a Back up file)
2) Download a Registry program (jv16 Powertools)
3) Delete Freestyler Registry
4) Install freestyler again
maby this will help
/spirit
1) Delete Freestyler (first make a Back up file)
2) Download a Registry program (jv16 Powertools)
3) Delete Freestyler Registry
4) Install freestyler again
maby this will help
/spirit
AMD FX-6100 (3.6ghz)x6, Nvidia 770GTX 4GB, 8GB Ram,ROG MB, enttec Pro, Open enttec, Velleman, T2250MTS-B1 22"touchscreen, Ilyama 23" screen, scans, dimm, rgbled, laser, soundsystem Just a drive-in show. Live and Dance
-
Jan_K
- Pro Supporter! (Moderator)
- Posts: 1155
- Joined: 04 Jan 2011, 21:57
- FreeStyler Version: Beta
- I Use FreeStyler for: To help others here on the Forum!
Re: Help movement don't work
Hej Spirit.
It was an error 40. (Error was placed 40 cm infront of the monitor)
I got the no. 2 PC back. It was out on a set.
Just turned it on and it had the exact same error and that one I knew was working just a few hours before I turned it on.
So what I missed was that when PC no. 2 was out on the set the guys had thaken my USB-DMX interface with them.
And when I started FS without the interface there just came the popup "Falied to open DMX."
Not a problem because I just need to have a look and some screen plot to the wiki.
But without the interface the error is there and when the interface is attaced then the error is gone.
And it is repeatable.
It may be an idea to maye it so, that if the program fail to open, then the pop-up box makes it possible to select / continue with, virtual interface.
/Jan
It was an error 40. (Error was placed 40 cm infront of the monitor)
I got the no. 2 PC back. It was out on a set.
Just turned it on and it had the exact same error and that one I knew was working just a few hours before I turned it on.
So what I missed was that when PC no. 2 was out on the set the guys had thaken my USB-DMX interface with them.
And when I started FS without the interface there just came the popup "Falied to open DMX."
Not a problem because I just need to have a look and some screen plot to the wiki.
But without the interface the error is there and when the interface is attaced then the error is gone.
And it is repeatable.
It may be an idea to maye it so, that if the program fail to open, then the pop-up box makes it possible to select / continue with, virtual interface.
/Jan