Differences

This shows you the differences between two versions of the page.

--- what_s_new [2018/12/26 14:46] – Added most recent version history from 4.5.6 up to 3.6.49, adding formatting later Laudrin
+++ what_s_new [2018/12/26 15:21] (current) – cleanup: only version numbers as headlines for easy navigation Laudrin
@@ Line 1: / Line 1: @@
 [[welcome|{{:fshome.jpg|}}]]
-====== Freestyler Version History ======
+====== FreeStyler Version History ======
-This page provides an explanation of the new featuers, beyond the basic release notes provided with the update.
+This page provides an explanation of the new features, beyond the basic release notes provided with the update.
 This is the what's new page for versions of FreeStyler (2.95h to 4.3.8, then 3.54 on).
@@ Line 11: / Line 11: @@
 ===== Version 3.6.49 =====
-==== New features: ====
+** New features: **
   * Added the ability to activate a submaster during FS launch
-==== Improvements: ====
+** Improvements: **
   * Made some improvements when adding fixtures.
-  * Added shortcuts to print fixturelist and clean sequences from the add/remove fixture window
+  * Added shortcuts to print fixture list and clean sequences from the add/remove fixture window
   * Click on "Offline mode" in the create sequence window to go to online mode
-====bug fixes:====
+**bug fixes: **
   * Fixed fatal crash when saving an empty cuelist with the cuelist editor
   * Bug fixed in the sequence cleanup fixtures
+=====Version 3.6.48=====
-Version 3.6.48
+** bug fixes: **
-bug fixes:
+  * Fast cue switcher didn't refresh cuelist contents
+  * Unable to set react to sound in the edit cuelist window
+  * Submaster list midi change
-Fast cue switcher didn't refresh cuelist contents
+=====Version 3.6.47=====
-Unable to set react to sound in the edit cuelist window
-Submasterlist midi change
+** New features: **
-Version 3.6.47
+  * Added the Eurolite USB-DMX512 Pro Cable-Interface
-New features:
+** Improvements: **
-Added the Eurolite USB-DMX512 Pro Cable-Interface
+  * Changing an override value without running cues/cuelists no longer changes the base value of that channel
-Improvements:
+  * (if you released that override the value remained the same giving the impression the override was still active)
+  * Added an option to the override buttons preventing FS stopping overwritten buttons, all buttons will remain running until manually stopped.
+** bug fixes: **
-Changing an overridevalue without running cues/cuelists no longer changes the basevalue of that channel
+  * Fixtures with just a tilt channel did not fade
-(if you released that override the value remained the same giving the impression the override was still active)
-Added an option to the overridebuttons preventing FS stopping overwritten buttons, all buttons will remain running until manualy stopped.
-bug fixes:
-Fixtures with just a tilt channel did not fade
+=====Version 3.6.46=====
+** bug fixes: **
-Version 3.6.46
+  * Font colors mismatch
+  * Submaster not updating all parameters on the cuelist window
+  * Sequence name not always visible in create chase window
+  * FixtureCreator: Error loop when "open" is pressed without fixture selected
+  * TouchUI: override status of specific channels were not updated
+  * TouchUI: Custom override buttons are expanded to 192
-bug fixes:
+=====Version 3.6.45=====
-Font colors mismatch
+** New features: **
-Submaster not updating all parameters on the cuelist window
-Sequencename not always visible in create chase window
-Fixturecreator: Error loop when "open" is pressed without fixture selected
-TouchUI: overridestatus of specific channels were not updated
-TouchUI: Custom overridebuttons are expanded to 192
+  * Receive network commands from two sources
-Version 3.6.45
+** bug fixes: **
-New features:
+  * Crash during load
-Receive network commands from two sources
+=====Version 3.6.44=====
-bug fixes:
-Crash during load
+** New features: **
+  * First implementation of sACN E1.31 support
+** bug fixes: **
-Version 3.6.44
+  * Subscript out of range error in cuelists
+  * Fixed error during load
-New features:
+=====Version 3.6.43=====
-First implementation of sACN E1.31 support
+** Improvements: **
-bug fixes:
-Subscript out of range error in cuelists
+  * Sequences per submaster increased to 60
-Fixed error during load
+  * Added fixtures should load on top now
+** bug fixes: **
-Version 3.6.43
+  * Wrong MIDI device loaded and started
+  * Submaster RUN midi shortcut was always in flash mode
+  * Art-Net bugs fixed
-Improvements:
+=====Version 3.6.42=====
-Sequences per submaster increased to 60
+** New features: **
-Added fixtures should load on top now
-bug fixes:
-Wrong MIDI device loaded and started
+  * DmxSoft interfaces added
-Submaster RUN midi shortcut was always in flash mode
-Art-Net bugs fixed
+=====Version 3.6.41=====
-Version 3.6.42
+** Improvements: **
-New features:
+  * Dark theme improved
+  * Rescan button for MIDI devices
+  * Added option to start Sound2Light on startup
+  * A lot of small improvements
-DmxSoft interfaces added
+** bug fixes: **
+  * Smoke window not loading settings
+  * Fog not toggling when continuous fogging is activated
+  * Disabled icons remained visible when changing zones
+  * Gobo rotation fader not always working
-Version 3.6.41
+=====Version 3.6.40=====
-Improvements:
+** ATTENTION ! **
-Dark theme improved
+  * Following interfaces were removed (old LPT interfaces using DLPORTIO.SYS): AVR DMX, Kristof Nys 64, LPR2DMX, Oksid DMX, Parzic
-Rescan button for MIDI devices
-Added option to start sound2light on startup
-A lot of small improvements
-bug fixes:
-Smoke window not loading settings
+** Improvements: **
-Fog not toggling when continuous fogging is activated
-Disabled icons remained visible when changing zones
-Goborotation fader not always working
+  * Installer removes all FreeStyler settings from the register when "Reset all settings to default" has been checked
+  * Installer asks always for the install directory
-Version 3.6.40
+** bug fixes: **
-ATTENTION !
+  * FreeStyler crashes when used on another OS than Windows 10
-Following interfaces were removed (old LPT interfaces using DLPORTIO.SYS): AVR DMX, Kristof Nys 64, LPR2DMX, Oksid DMX, Parzic
+=====Version 3.6.39=====
-Improvements:
-Installer removes all freestyler settings from the register when "Reset all settings to default" has been checked
+** New Features **
-Installer asks always for the install directory
-bug fixes:
-FreeStyler crashes when used on another OS than Windows 10
+  * Added a dark theme, a reboot is required to apply (beta)
+  * Submaster: FLASH and FLASH-out to first sequence in the list
+=====Version 3.6.38=====
-Version 3.6.39
+** Improvements: **
-New Features
+  * Improved override buttons click response
+  * Submasters: global RUN button
+  * Override buttons visible on all pages are now highlighted
+  * Submaster sequence will load following settings: loop, random, reverse, sound, tap and fade
-Added a dark theme, a reboot is required to apply (beta)
+** New Features **
-Submaster: FLASH and FLASH-out to first sequence in the list
+  * Distribute fixtures evenly over a shape
+  * Shape offset for each fixture
-Version 3.6.38
+** bug fixes: **
-Improvements:
+  * Show only 3 rows in override buttons fixed in alternative views: renamed to Hide the bottom row of buttons
+  * Double click on an override button disabled other buttons
+  * Custom sliders can cause a crash if min and max are the same
+  * Preset window not always visible when create sequence window is opened
+  * Override buttons visible on each page were not always visible
-Improved overridebuttons click response
+=====Version 3.6.37=====
-Submasters: global RUN button
-Overridebuttons visible on all pages are now highlited
-Submaster sequence will load following settings: loop, random, reverse, sound, tap and fade
-New Features
-Distribute fixtures evenly over a shape
+** Improvements: **
-Shape offset for each fixture
-bug fixes:
-Show only 3 rows in overridebuttons fixed in alternative views: renamed to Hide the bottom row of buttons
+  * Master intensity also applied in override buttons
-Doubleclick on an overridebutton disabled other buttons
-Custom sliders can cause a crash if min and max are the same
-Preset window not always visible when create sequence window is openend
-Overridebuttons visible on each page were not always visible
+** New Features **
-Version 3.6.37
+  * Override buttons are sizable.
-Improvements:
+** bug fixes: **
-Master intensity also applied in overridebuttons
+  * Apply to all steps with an applied preset blocked all channels
-New Features
+  * Save to current cuelist checkbox was always visible and wrong color
+  * Transitions between shapes in cuelists was not smooth
-Overridebuttons are sizable.
+=====Version 3.6.36=====
-bug fixes:
-Apply to all steps with an applied preset blocked all channels
+** Improvements: **
-Save to current cuelist checkbox was always visible and wrong color
-Transitions between shapes in cuelists was not smooth
+** New Features **
-Version 3.6.36
+  * Combine multiple cuelists (empty slots are not overwritten)
+  * Disable other cuelists option per cuelist
+  * Number of cuelists has been increased to 32 per page (only in alternative view)
+  * Edit cuelists in a separate window leaving the current cue untouched (right click on a cuelist or submaster)
+  * Move sequences in cue by drag and drop (on empty slot)
-Improvements:
+** bug fixes: **
-New Features
+  * Global colors not always showing
+  * Critical bug fixed in FX generator
+  * Critical bug fixed in fixture creator which generated a corrupt profile
+  * Critical bug fixed in submasters when "Remove sequence from cuelist" is pressed
+  * Live shape speed changed when editing sequences in offline mode
-Combine multiple cuelists (empty slots are not overwritten)
+=====Version 3.6.35=====
-Disable other cuelists option per cuelist
-Number of cuelists has been increased to 32 per page (only in alternative view)
-Edit cuelists in a seperate window leaving the current cue untouched (rightclick on a cuelist or submaster)
-Move sequences in cue by drag and drop (on empty slot)
-bug fixes:
-Global colors not always showing
+** Improvements: **
-Critical bug fixed in FX generator
-Critical bug fixed in fixture creator which generated a corrupt profile
-Critical bug fixed in submasters when "Remove sequence from cuelist" is pressed
-Live shape speed changed when editing sequences in offline mode
+  * Gobo rotation control received a min and a max value
+  * Warning when "Rearrange all" pressed
+  * Several small improvements
-Version 3.6.35
+** New Features **
-Improvements:
+  * Option to delete all previous chases, cues and shapes before restoring a backup
-Goborotation control received a min and a max value
+** bug fixes: **
-Warning when "Rearrange all" pressed
-Several small improvements
-New Features
-Option to delete all previous chases, cues and shapes before restoring a backup
+  * Submaster intensity changes when started.
-bug fixes:
+  * Several small bug fixes
-Submaster intensity changes when started.
+=====Version 3.6.34=====
-Several small bug fixes
+** Improvements: **
-Version 3.6.34
+  * Fog control is no longer send out in override values
+  * Override notification now only reflects a manual override, no longer active override buttons
-Improvements:
+** New Features **
-Fogcontrol is no longer send out in override values
+  * Auto save changes to cuelist when cuelist stops
-Override notification now only reflects a manual override, no longer active override buttons
+  * Submaster slider can be used to control sequence speed
-New Features
+  * Save the combination of running submasters to a cuelist
+  * Edit sequence from submaster list
+  * Create sequence window: reload sequence button
-Auto save changes to cuelist when cuelist stops
+** bug fixes: **
-Submaster slider can be used to control sequencespeed
-Save the combination of running submasters to a cuelist
-Edit sequence from submasterlist
-Create sequence window: reload sequence button
-bug fixes:
-Rename folder issue when folder allready exists
+  * Rename folder issue when folder already exists
-Sometimes a backup file doesn't restore
+  * Sometimes a backup file doesn't restore
-Fixture pictures were not included in a backupfile
+  * Fixture pictures were not included in a backup file
-Dimmerchannel in some cases didn't use Min and max values
+  * Dimmer channel in some cases didn't use Min and max values
-Reset fixture can, in some cases, get stuck in a loop
+  * Reset fixture can, in some cases, get stuck in a loop
-Annoying bug fixed when editing a sequence offline
+  * Annoying bug fixed when editing a sequence offline
+===== Version 3.6.33 =====
-Version 3.6.33
+** Improvements: **
-Improvements:
+  * Speed improvements
-Speed improvements
+===== Version 3.6.32 =====
+** New Features **
-Version 3.6.32
+  * New interface added: Eurolite freeDMX AP
+  * Group window received an alternative layout (press button left of the close button to enable it)
+  * Cue window received an alternative layout (press button left of the lock button to enable it)
-New Features
+=== Improvements: ===
-New interface added: Eurolite freeDMX AP
+  * New backup files include registry settings
-Group window received an alternative layout (press button left of the close button to enable it)
+  * Some small speed improvements
-Cue window received an alternative layout (press button left of the lock button to enable it)
+  * The old and abandonned touch UI 1 has been removed and replaced
-bug fixes:
+  * Save submaster levels on exit
+  * Improved the fixture bar left on the mainscreen (up to 8 per page, labels,...)
+  * Locate fixture: changed behaviour
-Critical bug fixed in Overridebuttons
+=== bug fixes: ===
-MIDI feedback when using MIDI pages
-Shapes bug fixed when using cascading shapes
-Override bug fixed
-Improvements:
-New backup files include registry settings
+  * Critical bug fixed in Override buttons
-Some small speed improvements
+  * MIDI feedback when using MIDI pages
-The old and abandonned touch UI 1 has been removed and replaced
+  * Shapes bug fixed when using cascading shapes
-Save submaster levels on exit
+  * Override bug fixed
-Improved the fixture bar left on the mainscreen (up to 8 per page, labels,...)
-Locate fixture: changed behaviour
+===== Version 3.6.31 =====
-Version 3.6.31
+** Improvements: **
-bug fixes:
+  * Ability to change shape speed in offline mode
-Critical bug fixed in Cuelists
+=== bug fixes: ===
-Improvements:
-Ability to change shape speed in offline mode
+  * Critical bug fixed in Cuelists
+===== Version 3.6.3 =====
-FreeStyler
+** New Features **
-Version History
-Version 3.6.3
-New Features
+  * Mirror universe 1 to universe 2 option
+  * Ability to rearrange cuelists and override buttons by drag & drop
+  * Move groups up & down
+  * Alter MIDI feedback value for on/off (multicolor controllers)
+  * Two midi controllers can be used
-Mirror universe 1 to universe 2 option
+** Improvements: **
-Ability to rearrange cuelists and override buttons by drag & drop
-Move groups up & down
-Alter MIDI feedback value for on/off (multicolor controllers)
-Two midi controllers can be used
-Improvements:
-Ability to change shape speed in offline mode
+  * Ability to change shape speed in offline mode
-Autosave location on exit
+  * Autosave location on exit
-bug fixes:
-Location dissapeared from window caption after restart
+** bug fixes: **
-Touch UI2: overridebutton captions dissapear when using custom text
+  * Location disappeared from window caption after restart
+  * Touch UI2: override button captions disappear when using custom text
-Version 3.6.2
+===== Version 3.6.2 =====
-New Features
+** New Features **
-Drag & drop cues directly onto the cuelist
+  * Drag & drop cues directly onto the cuelist
-Improvements:
-S2L blackout individual fixtures with configurable interval.
+** Improvements: **
-S2L icon: changed color
-bug fixes:
-Blackout for segment fixtures
+  * S2L blackout individual fixtures with configurable interval.
-MIDIcon sometimes fails to work
+  * S2L icon: changed color
+** bug fixes: **
-Version 3.6.1
+  * Blackout for segment fixtures
+  * MIDIcon sometimes fails to work
-bug fixes:
+===== Version 3.6.1 =====
-Fixture macro's fixed
+** bug fixes: **
-Submaster not saving lists fixed
+  * Fixture macros fixed
+  * Submaster not saving lists fixed
-Version 3.6.0
+===== Version 3.6.0 =====
-New Features
+** New Features **
-Drag & drop sequences directly onto the submasters
+  * Drag & drop sequences directly onto the submasters
-Open window: button to switch between cues and sequences
+  * Open window: button to switch between cues and sequences
-Custom sliders: used when a fixtures has several functions on one channel, to be configured for each fixture with fixturecreator
+  * Custom sliders: used when a fixtures has several functions on one channel, to be configured for each fixture with FixtureCreator
-Improvements:
-Added "Edit fixture" and "Reload fixture" option when rightclick on fixture.
+** Improvements: **
-bug fixes:
-Easy 3D fixed, do not forget to configure Universes patch
+  * Added "Edit fixture" and "Reload fixture" option when right click on fixture.
+  *
+** bug fixes: **
+  * Easy 3D fixed, do not forget to configure Universes patch
-Version 3.5.9
+===== Version 3.5.9 =====
-New Features
+** New Features **
-New MIDI shortcuts: remove from playback, Pauze S2L, Disable fixture
+  * New MIDI shortcuts: remove from playback, Pause S2L, Disable fixture
-Option to switch sequences back to auto when S2L is pauzed
+  * Option to switch sequences back to auto when S2L is paused
-Basic countdown added in Suntrix (midnight is 23:59:59 !!!!), preset "F1" is executed after countdown.
+  * Basic countdown added in Suntrix (midnight is 23:59:59 !!!!), preset "F1" is executed after countdown.
-Improvements:
-Offline mode goes off automatically
+** Improvements: **
-Custom touch captions are updated when control is cleared or added
-bug fixes:
-DMX400 critical bug fixed when decreasing total channels
+  * Offline mode goes off automatically
-Fixture status images not updated
+  * Custom touch captions are updated when control is cleared or added
-Suntrix and ledtrix data is now included into the backup file
+** bug fixes: **
-Version 3.5.8
+  * DMX400 critical bug fixed when decreasing total channels
+  * Fixture status images not updated
+  * Suntrix and ledtrix data is now included into the backup file
-bug fixes:
+===== Version 3.5.8 =====
-TabTip.exe bug fixed
+** bug fixes: **
+  * TabTip.exe bug fixed
-Version 3.5.7
+===== Version 3.5.7 =====
-New Features
+** New Features **
-ELC Buddy interface added
+  * ELC Buddy interface added
-Improvements:
-Disable previous cuelist option
+** Improvements: **
-ArtNet ported to .NET (.NET 3.5 required)
-MADRIX DLL version fixed
-bug fixes:
-Small bug fixes
+  * Disable previous cuelist option
+  * ArtNet ported to .NET (.NET 3.5 required)
+  * MADRIX DLL version fixed
+** bug fixes: **
-Version 3.5.6
+  * Small bug fixes
-New Features
+===== Version 3.5.6 =====
+** New Features **
 EUROLITE freeDMX interface added
@@ Line 388: / Line 390: @@
 Improvements:
-Small improvements
+** Small improvements **
 Touchscreen can be set in windowed mode
 Link touch to midi page
 DMXKing UltraDMX pro uses the FTDI driver (no VCP anymore = faster & more stable)
 Combine several fx into one sequence
-bug fixes:
+** bug fixes: **
 MIDI configuration unusable if "Note-on Note-off" option set after configuration.
 Small bug fixes
 ===== Version 3.5.5 =====
@@ Line 454: / Line 455: @@
-... This page was not maintained for a couple of years (11/03/2013), so versions after 3.4.8 are not shown here...
+… This page was not maintained for a couple of years (11/03/2013), so versions 3.4.8 to 3.5.3 are not shown here…
 ===== Version 3.4.8 =====
@@ Line 520: / Line 521: @@
     Installer fixed (some files were not copied preventing FS to load)
     Changing speed of a non-tap sequence stops the tap sync
-    Shape stops when overridebutton is applied
+    Shape stops when override button is applied
     Shape goes to home position when submaster starts
     GUS interface fix
@@ Line 581: / Line 582: @@
     Blackout amber & white channels
-    Touchscreen UI1 overridebutton status
+    Touchscreen UI1 override button status
@@ Line 594: / Line 595: @@
 Improvements:
-    Improved Fixturecreator
+    Improved FixtureCreator
     Single play sequence stops at the end.
     Small improvements
@@ Line 610: / Line 611: @@
   * None
-==== Improvements: ====
+** Improvements: **
   * Suntrix/Ledtrix improvements
   * Small improvements
-==== Bugs fixes: ====
+** Bugs fixes: **
 [[http://www.freestylersupport.com/bugs/changelog_page.php?project_id=1|Changelog]]
@@ Line 625: / Line 626: @@
 ===== Version 3.3.8 Beta =====
-==== New Features: ====
+** New Features: **
   * Touchscreen2 pages: up to 6 pages
-==== Improvements: ====
+** Improvements: **
   * Touchscreen2 encoders are replaced by sliders
   * Ability to leave speed "as is" for each submaster
-  * FixtureCreator is resizable and improved
+  * FixtureCreator is resizeable and improved
   * Small improvements
-==== Bugs fixes: ====
+** Bugs fixes: **
 [[http://www.freestylersupport.com/bugs/changelog_page.php?project_id=1|Changelog]]
   * Manual trigger and loop all sequences fixed
-  * Fixturecreator display macros fixed
+  * FixtureCreator display macros fixed
   * Open/save window create directory fixed
   * Clear cuelist fixed
@@ Line 646: / Line 647: @@
 ===== Version 3.3.7 Beta =====
-==== New Features ====
+** New Features **
   * EUROLITE USB-DMX512 Pro
-==== Improvements: ====
+** Improvements: **
   * Small improvements
-==== Bugs fixes: ====
+** Bugs fixes: **
 [[http://www.freestylersupport.com/bugs/changelog_page.php?project_id=1|Changelog]]
@@ Line 659: / Line 660: @@
 ===== Version 3.3.6 Beta =====
-==== New Features: ====
+** New Features: **
-==== Improvements: ====
+** Improvements: **
-  * "Disable buttons" didn't update intensitylabels
+  * "Disable buttons" didn't update intensity labels
-==== Bugs fixes: ====
+** Bugs fixes: **
 [[http://www.freestylersupport.com/bugs/changelog_page.php?project_id=1|Changelog]]
-  * Dimmerlevels were limited to 20-200
+  * Dimmer levels were limited to 20-200
   * Pan/tilt correction bug
   * Submaster MIDI control bug
   * Touch2 MIDI to DMX bug fixed
-  * Doubleclick bug fixed in submasters
+  * Double click bug fixed in submasters
 ===== Version 3.3.5 Beta =====
-==== New Features: ====
+** New Features: **
     * Shortcuts for quicksave and save in cue window
-    * Shortcuts for open in cuelist, submaster and overridebuttons
+    * Shortcuts for open in cuelist, submaster and override buttons
-==== Improvements: ====
+** Improvements: **
     * "Load cuelist only" option
     * FreeStyler accepts MIDI from different channels now
@@ Line 685: / Line 686: @@
     * When disabled the cuelists will blackout the fixtures (no longer all channels to 0)
-==== Bugs fixes: ====
+** Bugs fixes: **
 [[http://www.freestylersupport.com/bugs/changelog_page.php?project_id=1|Changelog]]
-    * Rightclick bug fixed in overridebuttons
+    * Right click bug fixed in override buttons
-    * Bug fixed in Fixturecreator (ranges turning red)
+    * Bug fixed in FixtureCreator (ranges turning red)
     * "Disable Buttons" does not update override status fixed
@@ Line 696: / Line 697: @@
 ===== Version 3.3.2 =====
-==== New Features: ====
+** New Features: **
     * Submaster fader start/stop control
     * Override buttons: only selected fixtures option
-    * Submaster groups: 1 SM controls all other SM group members (rightclick on a submaster to set membership)
+    * Submaster groups: 1 SM controls all other SM group members (right click on a submaster to set membership)
     * Individual Submaster control: Midi, keyboard
-    * Start Presets from overridebuttons (Drag & drop from presets to buttons, selected fixtures only)
+    * Start Presets from override buttons (Drag & drop from presets to buttons, selected fixtures only)
     * Lock DMX output (find it in the new "Output" menu)
-    * TCP/IP ASCII protocol (use the iPhone tcp/ip app directly without an external server application)
+    * TCP/IP ASCII protocol (use the iPhone TCP/IP app directly without an external server application)
     * Generate random values (per fixture or by group): Gobo1, Color1, Iris, Dimmer, Strobe, RGB, Pan/Tilt
-==== Improvements: ====
+** Improvements: **
     * MIDI options
     * Touchscreen - MIDI update improved performance
     * DMX4ALL 3rd. generation interface
     * Art-Net to DMX updated
-==== Bugs fixes: ====
+** Bugs fixes: **
     * Bug fixed in submaster: dimmerpacks not responding
     * MIDI: controlchange 0 not received
@@ Line 720: / Line 721: @@
 ===== Version 3.3.1 =====
-==== New Features: ====
+** New Features: **
-==== Improvements: ====
+** Improvements: **
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Small fixes
@@ Line 730: / Line 731: @@
 ===== Version 3.3.0 =====
-==== New Features: ====
+** New Features: **
-==== Improvements: ====
+** Improvements: **
   * Supports higher DPI
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Bug fixed in Ledtrix & Suntrix
 ===== Version 3.2.9 =====
-==== New Features: ====
+** New Features: **
-==== Improvements: ====
+** Improvements: **
   * improved Sound2light random mode: RGB and selection modes
   * Redesigned master control
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Minor fixes
 ===== Version 3.2.8 =====
-==== New Features: ====
+** New Features: **
-==== Improvements: ====
+** Improvements: **
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Bug fixed in "Show all windows"
   * Bug fixed when fades are disabled: master intensity was ignored
@@ Line 761: / Line 762: @@
 ===== Version 3.2.7 =====
-==== New Features: ====
+** New Features: **
-==== Improvements: ====
+** Improvements: **
   * Clicking a second time on a toolbar icon closes the window.
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Bug fixed in submaster: 20st sequence in list not played
@@ Line 772: / Line 773: @@
 ===== Version 3.2.6 =====
-==== New Features ====
+** New Features **
   * Added Eurolite USB-DMX interface
-==== Improvements: ====
+** Improvements: **
-==== Bugs fixes: ====
+** Bugs fixes: **
 ===== Version 3.2.5 =====
-==== New Features ====
+** New Features **
   * Added MegaDMX interface
-==== Improvements: ====
+** Improvements: **
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Bug fixed in sendmessage
   * Bug fixed in toggle joystick keyboard shortcut
@@ Line 793: / Line 794: @@
 ===== Version 3.2.4 =====
-==== New Features ====
+** New Features **
-==== Improvements: ====
+** Improvements: **
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Bugs fixed in sequence cleaner
   * Bug fixed when Color2 images were empty
@@ Line 805: / Line 806: @@
 (released 9-11-2009)
-==== New Features ====
+** New Features **
   * Sequence cleaner: removes unconfigured channels and selected fixtures from sequences
 (add/remove fixtures window -> options -> Cleanup sequences)
-==== Improvements: ====
+** Improvements: **
-  * Made a change when adding fixtures: auto startaddress can be altered.
+  * Made a change when adding fixtures: auto start address can be altered.
-==== Bugs fixes: ====
+** Bugs fixes: **
   *  Bug fixed in Suntrix and Ledtrix (if channels > 512)
   *  Bug fixed in MIDI (during first start)
@@ Line 821: / Line 822: @@
 (released 30-10-2009)
-==== New Features ====
+** New Features **
-==== Improvements: ====
+** Improvements: **
-==== Bugs fixes: ====
+** Bugs fixes: **
   * Bug fixed in startup values
-  * Bug fixed in Fixturecreator
+  * Bug fixed in FixtureCreator
   * Bug fixed in commandline
   *
-=====Version 3.2.1 (released 22-10-2009)=====
+=====Version 3.2.1=====
+(released 22-10-2009)
-====New Features====
+**New Features**
-    * FixtureCreator: autogenerate DMX values for gobo and color channels.
+    * FixtureCreator: auto generate DMX values for gobo and color channels.
-====Improvements:====
+**Improvements:====
     * Sound2Light received a BPM counter
-====Bugs fixes:====
+**Bugs fixes:====
     * Bug fixed in submaster: when gap in the cuelist
@@ Line 850: / Line 853: @@
-=====Version 3.2 (released 16-10-2009)=====
+=====Version 3.2=====
+(released 16-10-2009)
-====New Features====
+**New Features**
     * Master intensity: Virtual dimmer for LED fixtures without intensity channel.
@@ Line 858: / Line 862: @@
 {{:versions-new_touchscreen.jpg?nolink|}}
-    * Extra info about fixtureprofiles visible
+    * Extra info about fixture profiles visible
     * Next/previous color compatible with led fixtures
     * Default values for fixtures added
@@ Line 870: / Line 874: @@
 {{:images:versions-enttec_playback.jpg?nolink|}}{{:images:versions-enttec_program.jpg?nolink|}}{{:images:versions-enttec_shortcut.jpg?nolink|}}
-    * Added "Flip" function for movingheads (pan/tilt ranges can be configured with the Fixturecreator)
+    * Added "Flip" function for moving heads (pan/tilt ranges can be configured with the Fixturecreator)
-    * Output refreshrate can be changed
+    * Output refresh rate can be changed
-    * Lowest and highest limit can be set (rightclick on a slider at the right)
+    * Lowest and highest limit can be set (right click on a slider at the right)
     * Added two plugins: Suntrix and Ledtrix
     * Several enhancements
-====Improvements:====
+**Improvements:====
     * Some speed improvements in the override buttons
@@ Line 885: / Line 889: @@
     * Security added to touch interface n°_2
     * Some small enhancements in the Enttec wing code
-    * Changed Fixturecreator open dialog
+    * Changed FixtureCreator open dialog
-    * Tweaked FadeTimer
+    * Tweaked Fade Timer
     * FX engine: shutter chase compatible with led fixtures (intensity channel must be configured)
     * FX engine: color chase compatible with led fixtures.
@@ Line 894: / Line 898: @@
     * MIDI "control change" message fix (BCF2000,...)
     * FX window made smaller
-    * Realtime mode (scheduler) starts when freestyler starts (if configured)
+    * Realtime mode (scheduler) starts when FreeStyler starts (if configured)
     * New commandline added (compatible with Enttec program wing)
     * Create sequence: initial values change
@@ Line 906: / Line 910: @@
     * Touchscreens are from now on always on top
-====Bugs fixes:====
+**Bugs fixes:====
     * Bug fixed in override buttons: shapes got disabled when a second button was enabled
     * Bug fixed in cue: Shapes didn't work LTP
-    * Bug fixed in override buttons: transparancy worked in the wrong order
+    * Bug fixed in override buttons: transparency worked in the wrong order
     * Some more small bug fixes and improvements in the cue
     * Bug fixed in create sequence window: preset fade channels were not played
@@ Line 923: / Line 927: @@
     * Bug fixed: FS crashes if the interface wasn't connected
     * Ignore master intensity bug fixed
-    * Default installation folder has been changed to c:\freestyler (issues with Vista and Windows7)
+    * Default installation folder has been changed to c:\freestyler (issues with Vista and Windows 7)
     * Bug fixed in macro window
     * Issue with Submasters and manual trigger / tap sync fixed
@@ Line 933: / Line 937: @@
     * Bugs fixed in Enttec Wing system
     * Compact view bug fixed
-    * Fixed 100% cpu at first run
+    * Fixed 100% CPU at first run
     * Bug fixed in shape system
-    * Bug fixed in cuelist and overridebuttons (captions on buttons not changing)
+    * Bug fixed in cuelist and override buttons (captions on buttons not changing)
     * Bug fixed in "Loop all sequences"
     * Bug fixed in MIDI override buttons: Flash buttons sometimes got stuck
@@ Line 959: / Line 963: @@
 =====3.0=====
-====New functions:====
+**New functions:====
     * Some UI changes (new icons, colors)
@@ Line 967: / Line 971: @@
     * Added "Ignore blackout" function
     * Added "quick save" for saving sequences
-    * Added "disable all other buttons" in overridebuttons
+    * Added "disable all other buttons" in override buttons
     * Clone fixture function added
     * Up to 12 fixtures can be controlled by the DMX400
     * Disable/enable fixture (no values are send to that fixture)
-    * Disable/enable playback fixture (no playbackvalues are send to that fixture)
+    * Disable/enable playback fixture (no playback values are send to that fixture)
     * Added select next, previous, even and odd fixtures (keyboard and midi shortcuts)
     * Added LOCATE function to locate fixtures (you can configure custom values in the profile)
     * Icon added on fixture when override active
-    * Indication during sequence creation if a fixture is actif in a sequence (yellow= actif, red= actif with preset values)
+    * Indication during sequence creation if a fixture is active in a sequence (yellow= active, red= active with preset values)
     * Added some new programs to the DMX400
     * Added play cuelist buttons: save a cuelist and play that cuelist with one button !
@@ Line 985: / Line 989: @@
-====Bugs fixed:====
+**Bugs fixed:====
     * Some minor fixes in midi system
     * Bug fixed in create sequence
     * Bug fixed in next/prev colors/gobos
-    * update actif icon after disable all override buttons in cue
+    * update active icon after disable all override buttons in cue
-    * Bug fixed in relatif movement
+    * Bug fixed in relative movement
     * Bug fixed in master control
     * Bug fixed in realtime timecode
@@ Line 999: / Line 1003: @@
     * Bug fixed in snap/fade/off
     * Bug fixed in fast cue switcher
-    * Bug fixed: restore values not working in cuelistbuttons
+    * Bug fixed: restore values not working in cuelist buttons
     * Bug fixed when selecting fixtures
     * Bug fixed in palettes/presets
     * Fixed xp style
     * Bug fixed in open window
-    * Removed messageboxes which could pauze the program
+    * Removed messageboxes which could pause the program
     * Bug fixed: Override can't be altered after a sequence
     * Bug fixed: Delete step in sequence creator
-    * Overridebuttons fixed in touchscreen
+    * Override buttons fixed in touchscreen
-    * Bug fixed with midi and mousecursor
+    * Bug fixed with midi and mouse cursor
     * Bug fixed in color slider
     * Release override in all windows fixed
@@ Line 1021: / Line 1025: @@
-====Enhancements:====
+**Enhancements:====
     * Changed Freeze and blackout behaviour
@@ Line 1051: / Line 1055: @@
     * Bug fixed in touchscreen (wrong or no images shown)
     * Edit override button shortcut
-    * Improved rightclick on fixture
+    * Improved right click on fixture
     * Touchscreen update images when fixture clicked
     * Tooltips in cue
@@ Line 1072: / Line 1076: @@
     * Added in cue an option for releasing override before starting a sequence.
     * Added an option for always returning to previous values
-    * Added an extra colorpalette in colorwindow (RGB/CMY)
+    * Added an extra color palette in color window (RGB/CMY)
     * Cue, fog, sound2light and submaster are "always on top" when locked
-    * When sequences are deleted, cue and overridebuttons are updated
+    * When sequences are deleted, cue and override buttons are updated
     * Some minor improvements
@@ Line 1091: / Line 1095: @@
 =====2.96e beta=====
-    * Bug fixed in fixtureCreator (applying images) and saving
+    * Bug fixed in FixtureCreator (applying images) and saving
     * Bug fixed in Submaster (intensity on "fade" channels not altered in realtime)
     * Some minor improvements
@@ Line 1109: / Line 1113: @@
     * Bug fixed in initial loop mode
     * Bug fixed: "Back" button in submaster
-    * Rightclick on "Tap" disables tap sync
+    * Right click on "Tap" disables tap sync
     * Bug fixed in FixtureCreator and added some enhancements
     * Added uDMX interface
@@ Line 1124: / Line 1128: @@
     * Bug fixed in cue: Clear list
     * Bug fixed in Sound2light: fadetime
-    * Midi sequencespeed changed (fast sequences stopped while changing speed)
+    * Midi sequence speed changed (fast sequences stopped while changing speed)
 =====2.96 beta=====
@@ Line 1130: / Line 1134: @@
     * Override bug fixed when using sound to light with random values
     * More programmable override buttons (each page can hold 30 buttons, max 6x30 buttons = 180 buttons!!
-    * Added option for transparant windows (w2k and xp only)
+    * Added option for transparent windows (w2k and xp only)
     * Improved backup/restore
     * Rewritten some parts of the Cue
     * Midi velocity is changed to greater than value
-    * Bug fixed in Bezier speedcontrol (when changing cue speed)
+    * Bug fixed in Bezier speed control (when changing cue speed)
     * Bug fixed in DMX400 (only 4 channels were available)
     * Bug fixed with zoomchannel not stored in a sequence
@@ Line 1143: / Line 1147: @@
 =====2.95h beta=====
-    * Midi tapsync status
+    * Midi tap sync status
-    * Midi "Release overridesettings for selected fixtures" shortcut
+    * Midi "Release override settings for selected fixtures" shortcut
     * Added RGB functionality to the DMX400
-    * Made the Sound to light a seperate program
+    * Made the Sound to light a separate program
-    * Removed the startchannel setting in the DMX400 and replaced it with a rightclick menu for each fixture
+    * Removed the startchannel setting in the DMX400 and replaced it with a right click menu for each fixture
     * Added a min. and max. value for the intensity and strobe channel.
     * RGB/CMY visualization
@@ Line 1154: / Line 1158: @@
     * Added the Stageline DMX510 interface
     * Added Espion II interface
-    * Bug fixed in colorwindow
+    * Bug fixed in color window
-    * Bug fixed when dragging Beziershapes
+    * Bug fixed when dragging Bezier shapes
 [[welcome|{{:fshome.jpg|}}]]