no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== Random DMX values setup. ======
+\\
+{{:freestyler_sound_2_configuration_random.jpg|}}\\
+\\
+**Dropdown menu**\\
+**Each fixture separately:** Each individual fixture gets random values different from the others.\\
+**By fixture group:** Every fixture in a group gets the same values, the groups get different values.\\
+\\
+**Blackout when no beat is detected:**\\
+With this option enabled the fixture chosen to react to sound will blackout when no beat is detected in a configurable time.\\
+\\
+**Start seq. if no sound is detected:**\\
+If this option is enabled then the sequence restarts when no beat is detected in a configurable time.\\
+\\
+**Time combo box:**\\
+Time to wait after last beat before blackout or sequence restart.\\
+\\
+**Pan ch:**\\
+Configure which range of DMX values the pan channels get. this way you can avoid the fixture to point at undesirable places.\\
+**Tilt ch:**\\
+Configure which range of DMX values the tilt channels get. this way you can avoid the fixture to point at undesirable places.\\
+\\
+**Pan / Tilt Fade:**\\
+With this option enabled the pan/tilt channel fades between the values.\\
+**Pan / Tilt Fade scrollbar:**\\
+Set the desired fade timer by the scrollbar.\\
+\\
+Finally you need to enable the “React to sound” on each fixture where you want use this function by right click on the fixture.\\
+\\
+{{:freestyler_sound_2_configuration_random_fixture_enable.jpg|}}\\
+\\
+\\
+----
+\\