Differences

This shows you the differences between two versions of the page.

--- sound_light_interface_2 [2022/05/06 11:03] – Jan_K
+++ sound_light_interface_2 [2022/05/24 09:14] (current) – Jan_K
@@ Line 31: / Line 31: @@
 \\
 **Main Panel**\\
-Analyzer Control.\\
+**Analyzer Control.**\\
 \\
 {{:images:sound2light_2_main.jpg|}}\\
@@ Line 61: / Line 61: @@
 In the left side we have the main control.\\
 \\
-\\
+{{:images:sound2light_2_start_button.jpg|}}\\
 \\
 \\
@@ Line 78: / Line 78: @@
 It is possible to set if audio beat are to be multiplied or divided when it is send as trigger signal to FreeStyler.\\
 \\
-Multiply:\\
+**Multiply:**\\
 {{:images:sound2light_2_multiplier_tap.jpg|}}\\
 \\
@@ Line 87: / Line 87: @@
 \\
 \\
-Divide:\\
+**Divide:**\\
 {{:images:sound2light_2_divider_tap.jpg|}}\\
 \\
@@ Line 95: / Line 95: @@
 \\
 Note: It is not possible to use Multiply and Divide at the same time.\\
+\\
 \\
 ----
+**FreeStyler Sound configuration**\\
+Sound2light is an external add-on to FreeStyler and FreeStyler has it’s own configuration which need to be set.\\
+\\
+{{:images:freestyler_sound_2_configuration.jpg|}}\\
+\\
+There are basically two way the beat trigger can be used to control FreeStyler.\\
+**Jump to next scene:** Controls running sequences and the DMX400 chaser.\\
+To use Jump to next scene to control DMX400 the check box in the bottom of the panel must be checked “ON”\\
+\\
+**Random DMX value:** This generates random values direct to the fixture on the following channels: gobo, color, pan & tilt.\\
+\\
+**Buttons:**\\
+The two buttons ”Running”, Run / Pause the beat signal from the Sound2Light beat trigger and the “Trigger” button makes it possible for you to manually trigger a step.\\
+Note: These functions are a part of FreeStyles and the same functionality in the Sound2Light add-on are a part of the add-on.\\
+\\
+**Jump to next scene:**\\
+When you are using this mode you can control the scene / step shift in your sequences by the beat from the Sound2Light programmer.\\
+Each beat will trig the chosen sequence to go to next step.\\
+For more info of how to setup the Cue window to react on sound. See [[sound_to_light_cue_window_configuration|]].\\
+\\
+**Random DMX value:**\\
+In this modes fixtures enabled to react to sound will be controlled by the sound to light control in freestyler.\\ The sound to light control generates a random value for following fixture channels: gobo, color (colorwheel and RGB), pan & tilt.\\
+You also need to enable the wanted fixtures to react to the sound.\\
+For more info see [[sound_to_light_random_dmx_values_setup|]]\\
+\\
+----
+\\