Differences

This shows you the differences between two versions of the page.

--- setup:setup_menu [2011/10/19 16:55] – Spirit
+++ setup:setup_menu [2020/06/10 05:41] (current) – Jan_K
@@ Line 2: / Line 2: @@
 \\
 \\
-The freestyler Setup menu can be found under “Setup”.\\
+The FreeStyler Setup menu can be found under “Setup”.\\
-\\
-{{:images:setup_menu:setup_menu.gif|}}\\
 \\
+\\{{:images:setup_menu:setup_menu_2.jpg|}}\\
 Under this menu the following can be found and set.\\
 \\
 \\
+\\
+----
+===== Add/Remove fixtures =====
+\\
+[[fixtures:adding_and_removing_fixtures|]]
+\\
+\\
+\\
+----
+===== FreeStyler Setup =====
 **Interface Setup**\\
 \\
-{{:images:setup_menu:setup_menu_controller.gif|}}\\
+{{:images:setup_menu:setup_menu_controller_1.jpg|}}\\
 \\
-If FreeStyler is used for Demo without interface or 3D view then the “Virtual Interface” are to be used.\\
+If FreeStyler is used for Demo without interface or 3D view then “Virtual Interface” can be used.\\
-As an “Advanced” setting the refreshrate of the output can be set. This determine how offend the fixtures are updated.\\
+As an “Advanced” setting the refreshrate of the output can be set. This determine how often the fixtures are updated.\\
 A lower value will give a higher speed.\\
 Note: Some fixture can, if they have a reset via DMX, be overloaded with data and thereby make a reset. So don’t run with higher speed than necessary.\\
+TIP: 3D view and the DMX device can also run at the same time\\
+\\
 \\
 **Reset**\\
@@ Line 22: / Line 35: @@
 \\
 \\
-The Supported interfaces can be found here. [[supported_dmx_interfaces|supportedm dmx interfaces]]\\
+The Supported interfaces can be found here. [[faq:supported_dmx_interface|supported dmx interfaces]]\\
+\\
+\\
+\\
+**External Control** [[:external_control|setup external control]]\\
+\\
+\\
+\\
+**Preferences** [[setup:setup_preferences|setup_menu_preferences]]\\
+\\
+\\
+\\
+----
+===== Link sliders with channel functions =====
+\\
+[[setup:link_sliders_with_channel_functions|]]
+\\
 \\
+----
+===== Use global colors =====
 \\
+[[setup:global_colors|]]
 \\
-**External Control** [[setup:setup_external_control|setup external control]]\\
 \\
+----
+===== Dark theme =====
+Dark theme changes the background color in the panels from white to a dark gray.\\
 \\
+{{:setup:dark_theme.jpg?800|}}\\
 \\
-**Preferences** [[setup:setup_menu_preferences|setup_menu_preferences]]\\
 \\
 ----
 \\