Run Command

You can use the command line in two modes:

channel mode mode: “1@100” –> channel one sets dmx value to 100% (255)
“1/5-3@DMX128” –> channel 1 thru 5 except channel 3 sets value 50% (128)

Fixture mode:

“1@100” –> fixture one sets intensity to 100% (255)
“1/5-3@DMX128” –> fixture 1 thru 5 except fixture 3 sets intensity to 50% (128)
“1+4COLOR@DMX20” –> fixture 1 and 4 sets colorwheel channel to 50
“goboROT@DMX230” –> the selected ficture(s) sets rotation channel for gobo to 230

		Examples
Key	Function	Command	Command execute
[Enter]	Execute
[@]	“at”, sets level/intensity	“1@100”	Sets fixture 1 to 100% (255) intensity
[DMX]	DMX-value	“1@DMX100”	Sets fixture 1 to 39% (100) intensity
[+]	And	“1+3@75”	Sets fixture 1 and 3 to 75% (192) intensity
[/]	Thru	“1/10@50”	Sets fixture 1 thru 10 to 50% (128)
[-]	Without/Except	“1/10-5@25”	Sets fixture 1 thru 10 without/except fixture 5 to 25% (64)
[CLR]	Clear command line
[BS]	Back space
[shift]	Use shift functions (attributes)	“3@GOBODMX100”	Sets the gobo channel for fixture 3 to 39% (100)

Key combinations for attributes
Keys	Attribute
[shift]+[0]	PAN@
[shift]+[1]	TILT@
[shift]+[2]	COLOR@
[shift]+[3]	GOBO@
[shift]+[4]	PRISM@
[shift]+[5]	CYAN@
[shift]+[6]	MAGENTA@
[shift]+[7]	YELLOW@
[shift]+[8]	prismROT@
[shift]+[9]	goboROT@