Differences

This shows you the differences between two versions of the page.

--- master_functions:blackout [2011/10/03 18:23] – bendigo
+++ master_functions:blackout [2013/03/11 03:46] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Blackout ======
-Blackout is a grand master function that turns off and on all lights.\\
+Blackout is a grand master function that turns on and off all lights with the click of one button.\\
-Here is a small description of how it works.\\
-\\
+{{:function_blackout_icon.gif|}}\\
-In general it takes all shutters and close / open them with one button.\\
-The shutter is in the [[:panel_description_lamp_panel|]].\\
+Here is a small description of how it works:\\
+It takes all shutters and closes / opens them with one button.\\
+The shutter is in the [[fixture_control:lamp_panel|]].\\
 \\
 There will be this red box on the screen when it is active.\\
 \\
-{{:function_blackout_icon.gif|}}\\
+{{:function_blackout_blackout_on.gif|}}\\
 \\
-It may be necessary to have fixtures that are not included in the blackout.\\
+It may be necessary to have fixtures that are ignored when the "blackout" button is pressed.\\
-As an example this could be a light on a dj with moving heads.\\
+For example:
-The light position are to be adjusted once, Colors are to shift with the rest of the setup.\\
+A DJ wants a light on himself at all times with one of his fixtures - "fixture A".\\
-This light are in this example to be switched off seperately so it is possible to have light on the dj when the rest is turned off with “Blackout”\\
+The "fixture A" light intensity is to be adjusted once and the colour is to change with the rest of the setup.\\
+"Fixture A" shutter is to be controlled seperately - making it possible to have a light on the dj when the rest of the lights are turned off with the “Blackout” button.\\
 \\
 To do this the fixture can be set to ignore blackout .\\
-This is done in the “Add/Remove fixtures” which can be found under the menu “Setup” -> “Add/Remove fixtures” \\
+This is done in “Add/Remove fixtures” - which can be found under the menu “Setup” -> “Add/Remove fixtures” \\
 \\
-{{:function_blackout_blackout_on.gif|}}\\
 \\
 Blackout with individual control, can of course also be made with cue / sequence but that is an other story.\\
@@ Line 31: / Line 34: @@
 \\
 If the blackout doesn't work as was expected then have a look in the troubleshooting.\\
-[[:troubleshooting#Functions|Troubleshooting]]\\
+[[faq:troubleshooting#Functions|Troubleshooting]]\\
 \\
 \\