Differences

This shows you the differences between two versions of the page.

--- fixtures:adding_and_removing_fixtures [2019/01/28 07:53] – [Options] Jan_K
+++ fixtures:adding_and_removing_fixtures [2019/01/29 06:59] (current) – [Options] Jan_K
@@ Line 143: / Line 143: @@
 {{:fixtures:fixture_library_remove_1a.jpg?|}}
-To remove fixtures you would open the "Add/Remove fixtures" dialogue from the "Setup" menu then select the fixture that you want to remove in the list on the right and then press the blue arrow that points left to remove it from the list.
+To remove fixtures you would open the "Add/Remove fixtures" dialogue from the "Setup" menu then select the fixture that you want to remove in the list on the right and then press the blue arrow that points left to remove it from the list.\\
+\\
-{{:images:add_remove_fixtures_101.jpg?nolink|}}
+Before you removing a fixture it is a good idea to consider what will be affected by this removal. If the fixture never has been added / programmed into a sequence then just remove it.\\
+But in the case where it has been programmed into a sequence then it will be a good idea to clean up the sequences.\\ This is to avoid a new fixture with another DMX table to be controlled by a sequence which is not programmed for it. It will mess-up your control.\\
-You will be given a prompt when you click the blue arrow that asks "Do you want to clean-up your sequences?". What the Sequence Cleaner does is enable you to select any sequences you have and removes the channels associated with the fixture you are deleting from them, keeping your sequences clean. What you decide here is up to you, experience and familiarity with the program will dictate in the end. For now just press the "No" button.
+So the advise is clean-up the sequence before removing the fixture. [[fixtures:adding_and_removing_fixtures#Cleanup sequences.|]]\\
+\\
+\\
-{{:fixtures:fixture_library_remove_2.jpg?|}}
+{{:fixtures:fixture_library_remove_2.jpg?|}}\\
+\\
-As you can see the fixture has been removed from the list on the right.
+Click on the remove arrow and as you can see the fixture has been removed from the list on the right.\\
 You can now close this dialogue.\\
@@ Line 176: / Line 176: @@
 \\
 === Reset channel settings ===
+The following parameters are reset by this function:
+   *Channel inversed
+   *Favorite values
+   *Startup values
+   *Shutdown values
+   *Channel disabled
+   *Channel playback disabled
+   *Patching
+   *Low limits
+   *High limits
+   *Compensation values
+   *Release locked
 \\
-** Please Enter info **\\
 \\
+------
 \\
 === Cleanup sequences. ===
@@ Line 187: / Line 199: @@
 \\
 \\
+------
 \\
 === Print fixture list. ===