Differences

This shows you the differences between two versions of the page.

--- fixtures:adding_and_removing_fixtures [2012/01/11 16:59] – [Adding fixtures] Spirit
+++ fixtures:adding_and_removing_fixtures [2019/01/29 06:59] (current) – [Options] Jan_K
@@ Line 6: / Line 6: @@
 \\
 Note:\\
-The examples bellow are based on different versions of FreeStyler and actually shows that this program is alive.
+The examples below are based on different versions of FreeStyler and actually shows that this program is alive.
 This also means that there are minor deviation in the figures shown and the latest version.
 The deviation are not that significant and therefore has this part not been updated.
@@ Line 15: / Line 15: @@
 When FreeStyler has been started you will see a menu/toolbar at the top left of the screen like the one below.
-{{:images:fs_0002.jpg?nolink|}}
+{{:fixtures:freestyler_toolbar.jpg?|}}
 Click "Setup" in the menu and then click "Add/Remove fixtures".
-{{:images:fs_0004.jpg?nolink|}}
+{{:fixtures:setup_menu.jpg?|}}
 You should now see the following dialogue box in the centre of you screen.
-{{:images:fs_0005.jpg?nolink|}}
+{{:fixtures:fixture_library_1.jpg?|}}
-On the left of this dialogue box is a list of lighting manufactures of existing lighting fixtures. Click the folder to expand or collapse the list of fixtures contained within.\\
+On the left of this dialogue box is a list of lighting manufactures of existing lighting fixtures.
+\\Click the folder to expand or collapse the list of fixtures contained within.\\
 Below this will be the description and picture of the selected fixture.\\
 On the right of this dialogue box is a list of fixtures already added (patched), including the address and name.\\
-Below this is a dipswitch image which will show the dipswitch settings of a fixture selected from the list of your patched fixtures. In this image a dispswitch is off if up and on if down. use this to set the dipswitch of fixtures that require this type of addressing.\\
+Below this is a dipswitch image which will show the dipswitch settings of a fixture selected from the list of your patched fixtures.
+\\In this image a dispswitch is off if up and on if down. Use this to set the dipswitch of fixtures that require this type of addressing.\\
 Next to the dipswitch is a control where you can manually change the address of an existing patched fixture if you need too.\\
 Three controls below this allow you to set some features of how your patched fixtures will re-act with FreeStyler.\\
-Below this are two buttons, "Reset fixt. data" which I do not know what it does and the "Close" button will close this dialogue and reurn you to the main FreeStyler screen.\\
+These parameters can be changed later direct on the fixture.\\
+"Close" button will close this dialogue and return you to the main FreeStyler screen.\\
-{{:images:fs_0006.jpg?nolink|}}
+{{:fixtures:fixture_library_2.jpg?|}}
 Scroll down the list of fixtures and find the "PARCAN" folder, click the folder to expand it.
-{{:images:fs_0007.jpg?nolink|}}
+{{:fixtures:fixture_library_3.jpg?|}}
 Select the "PAR_BLUE" fixture by clicking it. Notice a picture and some information about the fixture appears below Now click the arrow that points to the right to add it to your list of fixtures.
-{{:images:fs_0008.jpg?nolink|}}
+{{:fixtures:fixture_library_4.jpg?|}}
-A little dialogue will pop-up, this shows the row to start at in the list, the row has nothing to do with DMX addressing it is just it's position in the list on the right, the number of fixtures you want to add, there are check (tick) boxes to enable auto-address and auto-create group.\\
+A little dialogue will pop-up which set the following.\\
+**"Row":** Row has nothing to do with DMX addressing it is just it's position in the list on the right.\\
+**"no. of fixtures to add":** Sets how many pieces of this fixture you want to add.\\
+**"DMX Universe":** There are 2 universes available each on 512 channels.\\
+**"DMX Start address":** This is the address where the fixture are to listen on. FreeStyler will automatic give the fixture the first free address but you can manually change this if needed. If you change it manually then you need to know what you are doing.\\
+**"Add fixture to zone":** Zone is 4 tabs in the main screen where it is possible to organize the fixtures so the main screen don’t get to crowded. See [[setup:setup_preferences#Zone|]]\\
+Additional there are 2 check (tick) boxes to enable auto-address and auto-create group.\\
 For now just press the "Add" button to add the fixture to your list.
-{{:images:fs_0009.jpg?nolink|}}
+{{:fixtures:fixture_library_4a.jpg?}}
 Now you can see the par can has been added to the list on the right. It shows it is using an address range of 1-1 which means one channel is used by this fixture. It has also been given a name of PAR_blue_1. If you wanted to change the name that has been created then just click in it as is shown by the balloon tip and then you can use the backspace key to erase the name and enter your own.\\
@@ Line 52: / Line 61: @@
 For now I want you to add 1 each of the rest of those PAR Cans, just do what you did above.\\
-{{:images:fs_0010.jpg?nolink|}}
+{{:fixtures:fixture_library_5.jpg?|}}
 If you have done everything correctly then you should have 8 PAR Cans as shown in the above list.\\
@@ Line 59: / Line 68: @@
 Remember your fixtures dipswitches might be on in the up position and off in the down position. It depends on the fixture. Some dipswitches show the on position.\\
-{{:images:fs_0011.jpg?nolink|}}
+{{:fixtures:fixture_library_6.jpg?|}}
 Looking back at the FreeStyler main screen you can see the 8 PAR Cans that have been added/patched. You might want to change the names so they are easier to read as you only get a short name on the screen for each fixture.\\
 To rename a fixture just click on the name of the fixture you want to change in the list on the right and then press the backspace key to delete its current contents, now type in the new name for it and press enter. I am not going to show how to do that as I think the explanation is clear enough.
-{{:images:fs_0012.jpg?nolink|}}
+{{:fixtures:fixture_library_7.jpg?|}}
 You can now close the "Add/Remove fixtures" dialogue.
+\\
+\\
+\\
 ==== Manual addressing of fixtures ====
-FreeStyler not only allows automatic addressing of fixtures but also allows you to change the address of patched fixtures and patch fixtures without auto-addressing then assign an address to that fixture.
+FreeStyler not only allows automatic addressing of fixtures but also allows you to change the address of patched fixtures and patch fixtures without auto-addressing then assign an address to that fixture.\\
+\\
+This can be used for various purpose and one that may pop-up from time to time is the combined fixtures where more fixtures are placed on the same address to get a full fixture control. See [[fixture_creator:combined_fixtures|]]\\
+\\
+NOTE: When ”Enable addressing” is checked ”ON” FreeStyler does the addressing for you. If you give an occupied address in the ”DMX startaddress” then it will automatically be moved to the next free address.\\
+And when ”Enable addressing” is checked ”OFF” the address in the fixture list will be empty and you are free to enter address.\\
+As there is no check of what you are doing "Be careful"\\
+\\
 OK lets patch another PAR_yellow, ensure you have selected the PAR_yellow and the click the "add fixture button". You should see the familiar dialogue as shown below.
-{{:images:add_fixture_at_own_address_001.png?nolink|}}
+{{:fixtures:fixture_library_8.jpg?|}}
-As you can see I have changed the column to 15, the reason I have done this is to seperate it from the rest of the fixtures so it stand out easier in this tutorial. I also have changed the address to 15, this is actually not necessary as it is ignored if manually addressing a fixture ???? I have also un-ticked the "auto-address" tick box, well we are patching a fixture to an address we want rather than what FreeStyler wants to address it to.\\
+As you can see I have changed the column to 15, the reason I have done this is to seperate it from the rest of the fixtures so it stand out easier in this tutorial. I also have changed the address to 15, this is actually not necessary as it is ignored if manually addressing a fixture ???? I have also un-ticked the "Enable addressing" tick box, well we are patching a fixture to an address we want rather than what FreeStyler wants to address it to.\\
 Click the "Add" button.
-{{:images:add_fixture_at_own_address_002.png?nolink|}}
+{{:fixtures:fixture_library_9.jpg?|}}
 Now we have to actually set the address of the fixture, so click the fixture in the list on the right that you need to set the address for then click in the "StartAddress" input box and you get the prompt shown below.
-{{:images:add_fixture_at_own_address_003.png?nolink|}}
+{{:fixtures:fixture_library_10.jpg?|}}
 Click the "OK" button.
-{{:images:add_fixture_at_own_address_004.png?nolink|}}
+{{:fixtures:fixture_library_11.jpg?|}}
-Now type in the address you want to set the fixture at in the "StartAddress" input box and press the "set" button.
+Now type in the address you want to set the fixture at in the "StartAddress" input box and press the "Return" button.
-{{:images:add_fixture_at_own_address_005.png?nolink|}}
+{{:fixtures:fixture_library_12.jpg?|}}
-Now you can see the address has been set at 15 and it is in row 15, which I set in the dialogue.
+Now you can see the address has been set at 15 and it is in row 15, which I set in the dialogue.\\
-That is how you manually address fixtures in FreeStyler.
+That is how you manually address fixtures in FreeStyler. \\
+\\
+\\
+\\
+==== Auto. Create Group ====
+If you want to add more fixtures of the same type then “Auto Create Group” automatically becomes checked on and you will have the fixtures grouped.\\
+{{:fixtures:fixture_library_group_1.jpg?|}}
-==== Remove fixtures ====
+Here 4 x PAR_yellow is added.
-{{:images:add_remove_fixtures_100.jpg?nolink|}}
+{{:fixtures:fixture_library_group_2.jpg?|}}
-To remove fixtures you would open the "Add/Remove fixtures" dialogue from the "Setup" menu then select the fixture that you want to remove in the list on the right and then press the blue arrow that points left to remove it from the list.
+In the main screen it will look like this.
-{{:images:add_remove_fixtures_101.jpg?nolink|}}
+{{:fixtures:fixture_library_group_3.jpg?|}}
-You will be given a prompt when you click the blue arrow that asks "Do you want to clean-up your sequences?". What the Sequence Cleaner does is enable you to select any sequences you have and removes the channels associated with the fixture you are deleting from them, keeping your sequences clean. What you decide here is up to you, experience and familiarity with the program will dictate in the end. For now just press the "No" button.
+If you click the group parcan in left side of the image the 4 grouped parcans are selected.
+Note that the 1.st yellow parcan is not selected by the group as this one was added previously as a single fixture.
-{{:images:add_remove_fixtures_102.jpg?nolink|}}
+{{:fixtures:fixture_library_group_4.jpg?|}}
-As you can see the fixture has been removed from the list on the right.
+To edit the group go into “Edit” -> “Groups”\\
+[[fixtures:fixture_groups_create|]]
+\\
+\\
+\\
+==== Remove fixtures ====
+{{:fixtures:fixture_library_remove_1a.jpg?|}}
+To remove fixtures you would open the "Add/Remove fixtures" dialogue from the "Setup" menu then select the fixture that you want to remove in the list on the right and then press the blue arrow that points left to remove it from the list.\\
+\\
+Before you removing a fixture it is a good idea to consider what will be affected by this removal. If the fixture never has been added / programmed into a sequence then just remove it.\\
+But in the case where it has been programmed into a sequence then it will be a good idea to clean up the sequences.\\ This is to avoid a new fixture with another DMX table to be controlled by a sequence which is not programmed for it. It will mess-up your control.\\
+So the advise is clean-up the sequence before removing the fixture. [[fixtures:adding_and_removing_fixtures#Cleanup sequences.|]]\\
+\\
+\\
+{{:fixtures:fixture_library_remove_2.jpg?|}}\\
+\\
+Click on the remove arrow and as you can see the fixture has been removed from the list on the right.\\
 You can now close this dialogue.\\
@@ Line 119: / Line 161: @@
 \\
 ==== Options ====
-{{:images:add_fixture_option.gif|}}\\
+{{:fixtures:fixture_library_options.jpg?|}}\\
 \\
 === Patching. ===
@@ Line 133: / Line 175: @@
 \\
 \\
-=== Cleanup sequences. ===
+=== Reset channel settings ===
-This function is used to remove channels from sequences. It is channels where fixtures has been removed or channel related to the marked fixture that will be removed from the sequence.\\
+The following parameters are reset by this function:
-{{:images:add_fixture_option_cleanupsec.gif|}}\\
+   *Channel inversed
+   *Favorite values
+   *Startup values
+   *Shutdown values
+   *Channel disabled
+   *Channel playback disabled
+   *Patching
+   *Low limits
+   *High limits
+   *Compensation values
+   *Release locked
 \\
 \\
-=== Reset channel settings ===
+------
 \\
-** Please Enter info **\\
+=== Cleanup sequences. ===
+{{:fixtures:fixture_library_cleanup_sequnece_icon.jpg?|}}\\
 \\
+This function is used to remove channels from sequences. It is channels where fixtures has been removed or channel related to the marked fixture that will be removed from the sequence.\\
+{{:fixtures:fixture_library_cleanup_sequnece_window.jpg?|}}\\
 \\
+\\
+------
 \\
 === Print fixture list. ===
+{{:fixtures:fixture_library_print_icon.jpg?|}}\\
+\\
 The print list looks like below where the right column is the dip-switch settings.\\
 \\
 \\
-{{:images:add_fixture_option_print.gif|}}\\
+{{:fixtures:fixture_library_print_fixture_ist.jpg?|}}\\
 \\
 \\
 ------
 \\