Support Forum

I bought this for a party and it works in automatic mode! But I am not sure what it is. Is it in the list of supported devices?
I couldn't find the same description in the list of supported devices.
I am happy to have a crack at writing a setup file but not sure where to start. So any tips welcome. There is no manual for this, only a small sheet.
I got it from this Amazon link if it is any help. https://www.amazon.de/gp/product/B07SJK ... _qh_dp_hza
Thanks to anyone who can start me off in the right direction.

According to the information on amazon your instrument can be controlled via DMX. If DMX control is in effect then the instrument uses 6 DMX addresses. Rotation, color and strobe can be controlled with DMX.

Set up a 6 channel generic fixture. Play with the various channels to see what they do then the fixture definition can be updated.

Thanks for starting me off. I used the Generic Chinese Ball file.
And I got the following results which are different to the generic.
Channel 1 LED group selection and intensity
Channel 2 Yellow/Red intensity
Channel 3 Green/Purple intensity
Channel 4 White/Blue Intensity
Channel 5 Strobe
Channel 6 Absolute position/speed of rotation
Hope that this helps someone else.
Thanks again.

pd2 wrote: ↑February 21st, 2020, 8:56 am Thanks for starting me off. I used the Generic Chinese Ball file.
And I got the following results which are different to the generic.
Channel 1 LED group selection and intensity
Channel 2 Yellow/Red intensity
Channel 3 Green/Purple intensity
Channel 4 White/Blue Intensity
Channel 5 Strobe
Channel 6 Absolute position/speed of rotation
Hope that this helps someone else.
Thanks again.

It does and doesn't help as we need DMX values, so we can correctly configue a fixture file.