These adverts are supporting the forum's costs and the products/services are not endorsed by the forum owners.

renkforce 60w LED spot

Fixture File Help & Support, This is not a Request forum we are here to help you not work for you... If you do need a fixture and don't wish to make one yourself or learn then go here : http://www.freestylersupport.com/wiki/f ... on_service
Forum rules
This forum is designed for you to get HELP with building fixtures, Please make an attempt if you get stuck YOU must upload your partial fixture file (as an exported fixture file) so we can point you in the right direction if you don't do this you won't LEARN and if you don't learn you will may never be able to get the fixtures you require. It is Very hard to make fixtures for people when we don't have the same light at hand to test it with after all having the light in front of you makes programing so much easier! That's why we will help but rarely build any fixtures for you. You Alone are the best person to build your fixtures if you need help ask if you want it building for you Don't....
or alternativaly if your willing to pay for fixtures to be created then go here : http://www.freestylersupport.com/wiki/f ... on_service


You can Upload your fixtures as attachments to your posts so there is no need to supply email details Please post any fixtures in the download forum if you require help please contact an Admin/Moderator.
Post Reply
quintezz
Knows how to turn Lights ON
Posts: 2
Joined: December 18th, 2019, 9:40 pm
FreeStyler Version: 3.5
I Use FreeStyler for: Nightclub Lighting

renkforce 60w LED spot

Post by quintezz »

Good morning . I tried to make the 60w renkforce LED spot in the FS creator but I didn't get it. can somebody help for this ?
https://www.conrad.com/p/led-moving-hea ... -w-1233874
You do not have the required permissions to view the files attached to this post.

Rod_Horning
Moderator
Posts: 613
Joined: November 16th, 2016, 2:24 pm
FreeStyler Version: 3.649
I Use FreeStyler for: Stage Show
Location: USA

Re: renkforce 60w LED spot

Post by Rod_Horning »

Attached is my attempt at a fixture for your instrument.

The following helpful programming windows are available via Windows -> All
Beam (Prism)
Colors
Gobos (I did not find images of the gobos so the Gobo window just uses numbers)
Lamp
Custom Sliders
Pan / Tilt (Note: the pan/tilt limits are configurable on the instrument. The fixture is set for a pan range of 540 and a tilt range of 270)

Your feedback is welcome.
You do not have the required permissions to view the files attached to this post.

quintezz
Knows how to turn Lights ON
Posts: 2
Joined: December 18th, 2019, 9:40 pm
FreeStyler Version: 3.5
I Use FreeStyler for: Nightclub Lighting

Re: renkforce 60w LED spot

Post by quintezz »

thanksssss . i check it and its ok :)

Post Reply

Return to “FreeStyler Fixture Files - Help & Support”