Page 1 of 1
Fixture Showtec Shark Wash One
Posted: December 29th, 2017, 3:09 pm
by DimiTheo
Hello.
Need fixture for showtec shark wash one
Thank you
Re: Fixture Showtec Shark Wash One
Posted: December 30th, 2017, 6:53 am
by Rod_Horning
Give this a try. Your feedback will be appreciated.
After you import and add the fixture to Freestyler, select it.
After you select it click on the top menu item Window -> All
This will display the following additional Freestyler programming windows (you might need to move them around in order to see all of them):
Beam (zoom)
Pan Tilt
Lamp
Macros
Colors
Custom Sliders
NOTE: This fixture is for the 15 channel configuration. Also attached is the user manual
Re: Fixture Showtec Shark Wash One
Posted: January 5th, 2018, 3:23 pm
by DimiTheo
Thank you..
Nice fixture but the macros didn't work..
All the others is ok
Re: Fixture Showtec Shark Wash One
Posted: January 6th, 2018, 5:21 am
by Rod_Horning
Thank you.
Have to ask this question first. For the macros to work (they control channel 15), according to the user manual, channel 6 must have a value between 1 and 255 AND channel 13 must have a value between 11 and 255. Was this the case when the macros did not work?
Channel 6 is the overall dimmer channel and Channel 13 is the White intensity. Perhaps I should add these 2 channels to the macro, say at 50%?