Page 1 of 1
Floureon® 90W Mini 9 head fixture
Posted: 10 Feb 2017, 18:06
by Rihanna
Re: Floureon® 90W Mini 9 head fixture
Posted: 10 Feb 2017, 19:24
by Rod_Horning
I can configure a fixture for the 16 channel mode.
I guess that, in 48 channel mode, channels 20 through 23 control the number 3 red, green, blue and white. So far I have not figured out what channels 24-47 control. Can you enlighten me? If so I can probably configure a fixture for 48 channel mode also.
Re: Floureon® 90W Mini 9 head fixture
Posted: 10 Feb 2017, 20:32
by Rihanna
Im really sorry but these pages are the only ones I have from the manual. I would be really regretful if you could help me out with the 16ch setup.
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 00:04
by Rod_Horning
Flouren Mini 9 16chan.pff
This is my first pass at the 16 channel fixture.
Please test it and give me feed back so that I may improve the fixture.
Looking at the 16 channel chart, many of the channels have ranges; just from the chart I don't know if these ranges are "on/off" or whether they control a range such as speed (or something). For example, channel 2 values 6-127 says it is X no motor and forward. What does that mean?
Channel 6 (I think), 7, 8 and 11 through 16 seem obvious that the values are a range and control speed / intensity, etc. The others are not clear, at least to me.
If you look at the macros I used the same graphic for the 4 sound control effects (channel 10). This was the only graphic in the Freestyler library. I will create better ones but wanted feedback first.
------------------------------------------
If you are willing to do the testing, I will create a 48 channel fixture. You will need to experiment with channels 20 through 47 and tell me what they do. Once I have that information I can significantly improve the fixture definition.
Regards
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 00:20
by Rihanna
Thank you I will report soon !
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 00:44
by Rihanna
Works perfectly! I would be willing to test the 48 channel fixture.
I tried the channels 20-47 with ESA DMX stand alone interface and no channel seem to work.
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 00:59
by Rod_Horning
Did you remember to change the configuration of the instrument via its control panel. If it is set to 16 channel mode it will ignore channels 17-48
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 01:42
by Rihanna
Yes my bad thanks for the suggestion.
12-47 Controls light of every single one beam.
12-red
13-green
14-blue
15-white
this pattern continues until 47
48-reset
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 03:09
by Rod_Horning
Floureon Mini 9 48chan.pff
First attempt for the 48chan fixture file.
Let me know how it works.
If you have any suggestions on making it easier to use let me know.
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 03:20
by Rihanna
Thank you very much ! I will try it out in the morning.
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 13:37
by Rihanna
Works flawlessly amazing thank you ! I will start making some presets and I will let you know.
Re: Floureon® 90W Mini 9 head fixture
Posted: 11 Feb 2017, 23:57
by Rod_Horning
Thank you for the feedback
Re: Floureon® 90W Mini 9 head fixture
Posted: 18 Sep 2017, 15:33
by chris101
Hi,
Any further progress on this fixture?
Best regards
Christian