Page 1 of 1

Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 20 Apr 2016, 00:06
by mrgordon27
The mysterious "Beam 200". It is a 5R beam moving head and is most similar (it seems) to the Elation Platinum 5R. These Beam 200 lights are everywhere at festivals and are Stage Techs go to light for mass quantity movers. I would be so forever grateful if someone would take the time to create this fixture with 16 channel mode.

USER MANUAL ATTACHED FOR REFERENCE

Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 20 Apr 2016, 00:09
by mrgordon27
I will pay moneyzzzz for it!

Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 20 Apr 2016, 02:05
by perezdj
I will give it a try!

Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 23 Apr 2016, 18:58
by perezdj
See attached fixture. Please note that this fixture is untested.

Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 17 Aug 2016, 21:42
by blackbird237
Hi, very new to Freestyler.. actually only a day in.

I have a similar light to this, but it's the 230W 7R beam.
I installed this profile and it kind of works, but I cannot get the fixture to turn on.

What am I doing wrong??

Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 17 Aug 2016, 22:41
by blackbird237
My guide shows the light on at 128 and I changed that. Stil can't get the light to turn on other than the strobe effect.

Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 24 Aug 2016, 04:28
by buttza
Check the default setting on the strobe channel in the fixture file.
Make sure it is set to an OPEN Value. This might be the shutter by default too.

Re: Can someone build fixture profile for this CHINA LIGHT? (manual attached)

Posted: 26 Nov 2017, 12:31
by dbaplaya
I posted in another section and Rod kindly helped me but I thought I would respond to this post incase others can help as well. I also have a beam 230 and certain functions do not work, if anyone else on here has a similar light please respond, I would be most grateful.