Support Forum

If I start a sequenz (with one step) on a override button, the fade-in (set in the sequenz) will be ignored. It switches on immediately.
In my case: a selfmade spot for the mirrorball need to softstart otherwise the current protection of the PWM-Powersupply stops the procedere because the 24V/150W halogen bulb has a very low resistance.
I'd find a work around setting the sequenze as a cue. But that way I can't add the spot to the fixtures whitch react by pressing the Blackout button. I'm not using the build in Blackout - I'd create a own one for the override buttons. If I would - the Lamp doesn't fade in.
I hope Icould describe my problem clearly...

Is there a way to enable the fade for sequenzes on override buttons? Would it be a feature request/bug?

Hit the cog wheel at the top of the Override window and there is an option at the bottom to enable the fade

Rusty

Thanks for your response!
By hitting the wheel I only have the Options:
- 32 Buttons (4x8)
- add page
- insert scenes
- clear all
- highest priority

I'm running V.3.5.5 - shall I upgrade?

edit: I'd just install Freestyler X2 and it works great just like I've expected!