Page 1 of 1
Fixture File for Lanta - Saturn Cuboid
Posted: May 31st, 2015, 7:20 am
by Uriahdemon
Hi Folks, I was wondering if anyone can please give me some help with these files. I have tried for a while but cant seem to get over this fixture has no intensity/dimmer function so I am obviously doing something wrong. Any help would be very much appreciated.
Re: Fixture File for Lanta - Saturn Cuboid
Posted: June 1st, 2015, 10:54 am
by Jan_K
Hej Uriahdemon
I had a quick look at the ssl2 fixture and can see that you uses the LED Panel with more beams.
I am not able to install 3D on the pc I have available at the moment so I can't verify your fixture.
Previously I have tried to get the LED panel with more beams to work but with no success.
I ended with creating a normal fixture only one beam.
To debug if this also is where you have the problem you can eventually try the same just building a fixture with one beam.
/Jan
Re: Fixture File for Lanta - Saturn Cuboid
Posted: June 1st, 2015, 11:47 am
by Jan_K
Looks like the multi beam is still an issue at nicolaudies easy view.
http://www.nicolaudie.com/forum_support ... ams#p48189
Re: Fixture File for Lanta - Saturn Cuboid
Posted: June 1st, 2015, 6:30 pm
by Uriahdemon
Thanks very much, I will create something basic then.
Re: Fixture File for Lanta - Saturn Cuboid
Posted: June 2nd, 2015, 6:23 am
by Jan_K
Hej Again.
I played a bit with the FreeStyler fixture have a look.
Lanta_Saturn_Cuboid_V1_05ch.pff
Re: Fixture File for Lanta - Saturn Cuboid
Posted: June 2nd, 2015, 6:42 pm
by Uriahdemon
Thanks very much for the updated file............ very much appreciated mate !!!