Support Forum

Here's my first crack at a really simple 2 channel fixture.
Not sure if this is correct.
It works...Most the way. I can't seem to get the strobe values correct (anything below 66 on Channel 2 and it just blacks out instead of strobing even slower, anything above 250 and it stays on).

cpuld you upload the manual for your fixture... Then I (or other users) will the the fixture file for you

Yes and No. the way you maked the fixture this way you can make all the fixtures but if you use the "Custom" fixture in the Fixture creator you can also add the value for the Strobe effect and you can make macro's for the rotation.
but at the end the fixture need to be like you want it, you need to use it.

I can't seem to get the strobe values correct (anything below 66 on Channel 2 and it just blacks out instead of strobing even slower, anything above 250 and it stays on).

So u say 0->66 = Blackout, 67->249=Strobing, 250->255= Lamp on

But can you be a litlle more specific about the Strobing.

http://www.chauvetlighting.com/products ... _ug-94.pdf

I'm at work at the moment, when I'm back home, I'll gladly post all the information I have.
I'll try remaking it as a custom fixture, so I can set Macros for the different speeds, etc.