Page 2 of 2
Re: Enttec Open locking up fix.
Posted: September 9th, 2011, 6:26 am
by vinnygogo
il post a picture of my pcb this afternoon. thanks in advance!
Re: Enttec Open locking up fix.
Posted: September 10th, 2011, 10:31 am
by vinnygogo
here is a picture. please help me! thanx in advance.
Re: Enttec Open locking up fix.
Posted: September 10th, 2011, 6:40 pm
by Mattotone
other side please
Re: Enttec Open locking up fix.
Posted: September 11th, 2011, 11:34 am
by vinnygogo
hello
i have decided to buy a pro dmx interface. a friend of mine with a lot of electronic skills also wasn't able to find the components. and it is also not sure that after the modification it wil work properly, so i am going to buy a pro. thanks for the help so far!
Re: Enttec Open locking up fix.
Posted: December 31st, 2011, 2:23 pm
by k__x
Re: Enttec Open locking up fix.
Posted: February 17th, 2012, 8:21 am
by jpk
Best fix is simply not using DMX devices that don't have an internal microprocessor. We designed a USB DMX unit smaller than the enttec open but fully compatible with the enttec pro so you get the best of both worlds. Any product that requires attention with a soldering iron should be avoided IMO.
Re: Enttec Open locking up fix.
Posted: March 29th, 2016, 3:37 pm
by MusicSync
I recommend below ArtNet to DMX interface to replace the USB to DMX device.
http://hz.aliexpress.com/store/product/ ... 20451.html