Support Forum

Need help creating this fixture i've tried and it somewhatworks but i can't configure the lamp on and off i feel i'm missing something here's what i got so far don't know what to configure next or if any body has it let me know

Thanks in advance

Link to manual:

http://www.eliminatorlighting.com/pdffi ... 196_ii.pdf

Mmax is right..

the Lamp attribute are for fixtures which is not a RGB fixture and have a halogen or discharge bulb you have to turn on before use. That is not necessary when you have a rgb fixture. you rgb par can have a shutter channel, so you have to enter the dmx values there to obtain blackout control over the fixture

ooo ok now i understand thanks for the help now i can control the cans pretty good with the freestyler thanks

remco_k wrote:@gta214: 100% of post was uppercase, I changed it to lowercase. Please use lowercase the next time. Looks a lot friendlier for all of us.

Sorry It my first posts jijije thanks for corecting it....

I have created a Fixture for Eliminator Electro 196 II w/ macros

My problem is, there are multiple channels for the same color and when I select a color lets say RED freestyler only turns on 1 channel of red instead of all 3 channels of red

Chan 1 Control
Chan 2 Red 1
Chan 3 Red 2
Chan 4 Red 3
Chan 5 Green 1
Chan 6 Green 2
Chan 7 Blue 1
Chan 8 Blue 2

http://img169.imageshack.us/i/elctro1.jpg/
http://img220.imageshack.us/i/electro2.jpg/

I looked at some other fixture files with multiple channels for the same color but did not see where it was referenced

also, what should i use for the 3d visualizer ?

thanks guys !!