Support Forum

Hi does anyone have the fixture for this laser?


https://nl.aliexpress.com/item/10050050 ... 1642215924

Attached is my attempt at a fixture definition for your lighting instrument.
Please test and provide feedback.

After you select the fixture in the Freestyler workspace click Windows->All. I hope the Macros and Custom Sliders windows are useful to you.

Rod_Horning wrote: ↑February 16th, 2023, 1:13 am Attached is my attempt at a fixture definition for your lighting instrument.
Please test and provide feedback.

After you select the fixture in the Freestyler workspace click Windows->All. I hope the Macros and Custom Sliders windows are useful to you.

Hi thanks for making the fixture i will try it when it gets here!!

I didn't expect to get a response so quickly

Hi, has anyone managed to run this laser from Feestyler via DMX? I have two such lasers, I used the fixture from the attachment above, the laser was set according to the address given by Freestyler and nothing happened. Either this fixture is not entirely good or these Chinese lasers do not support DMX512 at all.

Rod_Horning wrote: ↑February 16th, 2023, 1:13 am Attached is my attempt at a fixture definition for your lighting instrument.
Please test and provide feedback.

After you select the fixture in the Freestyler workspace click Windows->All. I hope the Macros and Custom Sliders windows are useful to you.

Thank you Rod! I have a slightly different laser, but your fixture works well enough to get it started.
Mine is the "RGB Laser 500MW Beam Line Scanner" or " SLP-RGB500""or Line Scanning Laser Light" by Guangzhou Aike Lighting
https://aliexpress.com/item/1005005997711420.html

@Duroelk, for me, it first also didn't do anything, but in my case that was because my new generic USB-DMX cable wasn't µDMX but something with an FTDI chip that needs to be configured as enttec.